Unpacking
This Combination Sander is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, and the truck and driver are gone, you will need to file a freight claim with the carrier. Save the containers and all packing materials for possible inspection by the carrier or its agent. Without the packing materials, filing a freight claim can be difficult. If you need assis- tance determining whether you need to file a freight claim, or with the procedure to file one, please contact our Customer Service.
When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.
Parts Inventory
After all the parts have been removed from the carton, you should have:
•Sanding Unit
•Belt Guard
•Disc Table Bracket
•Disc Table
•Belt Table
•Miter Gauge
•4 Knobs
•Fasteners
•Sanding Belt
•4mm Allen® Wrench
•8mm Allen® Wrench
Hardware | Location | Qty |
Hex Bolts 5/16" - 18 x 1/2" | Disc Table Bracket | 2 |
Flat Washers 5/16" | Disc Table Bracket | 4 |
Knobs | Disc Table Bracket | 2 |
Knobs | Belt Guard | 2 |
Flat Washer 3/8" | Belt Table Bracket | 1 |
Cap Screw 3/8" - 16 x 3/4" | Belt Table Bracket | 1 |
Screw | Lower Belt Guard | 1 |
|
|
|
NOTICE
A full parts list and breakdown can be found toward the end of this manual. For easier assembly, or to identify missing parts, please refer to the detailed illustrations at the end of the manual.
G3105 Combination Sander |