Crank Handle | G1066Z Control Panel | ||
|
|
|
|
|
|
|
|
The crank handle is normally installed on the front right lead screw shaft, and is held in place with two setscrews already threaded into the han- dle, as shown in Figure 3. The crank handle can be installed on the right or left side of the machine to maximize operator comfort and convenience.
Setscrew
Figure 3. Crank handle attachment.
To mount the control panel to the base unit on the Model G1066Z:
1.Match the holes in the control arm mounting plate to the threaded holes on the side of the the sander.
2.Use the
Figure 4. Control panel attached to base unit.
|
|
|
|
G1066/G1066Z/G1079 Drum Sander | |||