Grizzly G0473, G0472, G0476 owner manual Operations, Operation Safety, Basic Operation

Page 13

SECTION 3: OPERATIONS

Sandblasting presents a real hazard of silicosis and other lung contamination injuries! These Injuries are permanent and can get worse over time. If you use sandblasting equipment without the proper protection, your lungs and eyes may become irreversibly contaminated. DO NOT use this sandblaster unless you know how to use it and protect yourself correctly. For types of protective equipment and acceptable respirator types, contact your local OSHA or NIOSH office.

Operation Safety

NOTICE

If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.

4.Carefully, without causing a hazardous dust cloud, pour or spade-in the abrasive into the sandblaster. DO NOT over-fill or sandblasting will be sluggish and very cloudy inside of the cabinet.

–For Model G0472: Use 40 lbs of abrasive.

–For Model G0473: Use 10 lbs of abrasive.

–For Model G0476: Use 10 lbs of abrasive.

5.Insert the workpiece, and close and lock the loading door.

6.Adjust the air supply regulator to the correct air pressure.

Basic Operation

The Model G0472/G0473/G0476 Sandblasters are equipped with an industrial-duty blast gun with ceramic tip, a siphon hose, a built-in light, large viewing window, and sealed rubber gloves. The hopper recycles and stores the sandblast- ing media for reuse or easy removal. Safely blast away paint and rust without making a mess around your shop.

To use the sandblaster:

1.Wear safety glasses and respirator at all times when running and maintaining your sandblaster!

2.Plug in the AC/DC transformer and turn ON the light.

3.Install the correct nozzle and air jet into the gun for the abrasive type you will use.Refer to Page 12 for options.

–For Model G0472: Use 60-116 PSI at 8-25

CFM.

–For Model G0473: Use 60-100 PSI at 5-14

CFM.

–For Model G0476: Use 60-100 PSI at 5-14

CFM.

7.Turn ON your dust collection/vacuum system and air compresssor insert your hands in the gloves, and begin sand blasting in a slow circular motion.

Note: A good starting point for tip distance is two inches away from the workpiece. Start out with a low air pressure setting to avoid excess peening and abrasive wear.

Note: Experiment with different pressures, abrasives, tips and jets to gain practical experience.

Note: Keep the sandblasting abrasives moisture-free, otherwise; the blast gun tip will frequently clog.

G0472/G0473/G0476 Sandblasters

-11-

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Sandblasting Cabinet Page Table of Contents Foreword IntroductionContact Info Machine Data Safety Instructions for Machinery SafetyAlways Lock Mobile Bases if Used Before Operating Machinery Additional Safety Instructions for Sandblasters Set Up Safety Unpacking SET UPItems Needed for Set Up Gun assembly G0472/G0473/G0476 Sandblasters G0472 AssemblyFilter installation Install the gloves as shown in Figure G0473 AssemblyLight assembly G0472/G0473/G0476 Sandblasters G0476 AssemblyOperations Operation SafetyBasic Operation Nozzle/Jet Options Abrasive OptionsG0472/G0473/G0476 Sandblasters Parts Breakdown G0472 PartsDescription Parts List G0472Parts Breakdown G0473 Parts List G0473 Parts Breakdown G0476 Parts List G0476 Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC

G0476, G0473, G0472 specifications

Grizzly Industrial is well-known for producing high-quality woodworking and metalworking machinery, and their range of products includes the G0472, G0473, and G0476 models. Each of these machines caters to different aspects of metalworking and woodworking, bringing unique features and technologies to the table.

The Grizzly G0472 is a horizontal bandsaw designed primarily for metal cutting. One of its standout features is the heavy-duty construction, which ensures stability and precision during operation. Its robust frame allows it to handle even the most challenging materials with ease. The machine is equipped with a 1 HP motor that provides ample power for cutting various types of metal, from mild steel to aluminum. The G0472 also includes a hydraulic feed system that allows for adjustable feed rates, enhancing cutting efficiency and prolonging blade life.

The G0473 model is designed for woodworkers looking to make precision cuts. This vertical bandsaw features a powerful 2 HP motor, which enables it to achieve high cutting speeds. Its adjustable table incorporates a tilting feature that allows for angled cuts, expanding the versatility and range of projects it can handle. The G0473 also boasts a built-in dust collection system, which helps keep the workstation clean and minimizes the mess often associated with woodworking projects. Its guide system improves the accuracy of cuts, making it an ideal choice for both hobbyists and professional woodworkers.

Meanwhile, the Grizzly G0476 is a versatile bench top lathe designed for turning wood. It features a ½ HP motor that provides sufficient torque for various turning projects. With its compact size, the G0476 is perfect for workshops with limited space. The lathe comes equipped with a digital readout for precise spindle speed monitoring, helping users achieve the desired finish on their workpieces. Furthermore, its sturdy construction minimizes vibration, ensuring smooth operation and better results. The G0476 also includes a set of helpful accessories, such as a faceplate and tool rest, to facilitate various turning tasks.

In summary, Grizzly's G0472, G0473, and G0476 models each offer distinct features tailored to specific tasks within the realms of metalworking and woodworking. With robust power, adjustable features, and user-friendly technology, these machines exemplify Grizzly's commitment to quality and performance, making them excellent additions to any workshop.
Top Page Image Contents