Grizzly G0472, G0473, G0476 owner manual Safety Instructions for Machinery

Page 6

SECTION 1: SAFETY

For Your Own Safety, Read Instruction Manual Before Operating this Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

 

Indicates an imminently hazardous situation which, if not avoided,

 

 

WILL result in death or serious injury.

 

Indicates a potentially hazardous situation which, if not avoided,

 

COULD result in death or serious injury.

 

Indicates a potentially hazardous situation which, if not avoided,

 

MAY result in minor or moderate injury. It may also be used to alert

 

against unsafe practices.

NOTICE

This symbol is used to alert the user to useful information about

proper operation of the machine.

Safety Instructions for Machinery

1.READ THROUGH THE ENTIRE MANUAL BEFORE STARTING MACHINERY. Machinery presents serious injury hazards to untrained users.

2.ALWAYS USE ANSI APPROVED SAFETY GLASSES WHEN OPERATING MACHINERY. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

3.ALWAYS WEAR AN ANSI APPROVED RESPIRATOR WHEN OPERATING MACHINERY THAT PRODUCES DUST. Wood dust is a carcinogen and can cause cancer and severe respiratory illnesses.

4.ALWAYS USE HEARING PROTECTION WHEN OPERATING MACHINERY. Machinery noise can cause permanent hearing damage.

5.WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, or jewelry which may get caught in moving parts. Wear protective hair covering to con- tain long hair and wear non-slip footwear.

6.NEVER OPERATE MACHINERY WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. Be mentally alert at all times when running machinery.

-4-

G0472/G0473/G0476 Sandblasters

Image 6
Contents Sandblasting Cabinet Page Table of Contents Introduction ForewordContact Info Machine Data Safety Safety Instructions for MachineryAlways Lock Mobile Bases if Used Before Operating Machinery Additional Safety Instructions for Sandblasters SET UP Set Up Safety UnpackingItems Needed for Set Up G0472 Assembly Gun assembly G0472/G0473/G0476 SandblastersG0473 Assembly Filter installation Install the gloves as shown in FigureG0476 Assembly Light assembly G0472/G0473/G0476 SandblastersOperation Safety OperationsBasic Operation Abrasive Options Nozzle/Jet OptionsG0472/G0473/G0476 Sandblasters Parts Parts Breakdown G0472Parts List G0472 DescriptionParts Breakdown G0473 Parts List G0473 Parts Breakdown G0476 Parts List G0476 Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC

G0476, G0473, G0472 specifications

Grizzly Industrial is well-known for producing high-quality woodworking and metalworking machinery, and their range of products includes the G0472, G0473, and G0476 models. Each of these machines caters to different aspects of metalworking and woodworking, bringing unique features and technologies to the table.

The Grizzly G0472 is a horizontal bandsaw designed primarily for metal cutting. One of its standout features is the heavy-duty construction, which ensures stability and precision during operation. Its robust frame allows it to handle even the most challenging materials with ease. The machine is equipped with a 1 HP motor that provides ample power for cutting various types of metal, from mild steel to aluminum. The G0472 also includes a hydraulic feed system that allows for adjustable feed rates, enhancing cutting efficiency and prolonging blade life.

The G0473 model is designed for woodworkers looking to make precision cuts. This vertical bandsaw features a powerful 2 HP motor, which enables it to achieve high cutting speeds. Its adjustable table incorporates a tilting feature that allows for angled cuts, expanding the versatility and range of projects it can handle. The G0473 also boasts a built-in dust collection system, which helps keep the workstation clean and minimizes the mess often associated with woodworking projects. Its guide system improves the accuracy of cuts, making it an ideal choice for both hobbyists and professional woodworkers.

Meanwhile, the Grizzly G0476 is a versatile bench top lathe designed for turning wood. It features a ½ HP motor that provides sufficient torque for various turning projects. With its compact size, the G0476 is perfect for workshops with limited space. The lathe comes equipped with a digital readout for precise spindle speed monitoring, helping users achieve the desired finish on their workpieces. Furthermore, its sturdy construction minimizes vibration, ensuring smooth operation and better results. The G0476 also includes a set of helpful accessories, such as a faceplate and tool rest, to facilitate various turning tasks.

In summary, Grizzly's G0472, G0473, and G0476 models each offer distinct features tailored to specific tasks within the realms of metalworking and woodworking. With robust power, adjustable features, and user-friendly technology, these machines exemplify Grizzly's commitment to quality and performance, making them excellent additions to any workshop.