Grizzly G1013 instruction manual Inside Sanding, Sharpening

Page 21

Inside Sanding

To sand or grind an interior work area, the sand- ing belt must be fed through the workpiece and remounted on its rollers. Depending on your application, you may either remove the platen or keep it in place.

1.Remove the Belt Sanding Table and the Belt Guards.

2.Feed the Sanding Belt through the work- piece and over the Upper Idler Roller. Loosen the Small Upper Idler Roller, swing it toward the front of the machine, and feed the belt around the pulley.

3.Press down on the top arm and feed the remainder of the belt through the rollers as shown in Figure 21.

4.Replace guards and table.

5.Adjust belt tracking as described in

Adjustments section.

Figure 21. Belt arrangement for inside sanding.

Sharpening

Tilt the table to the desired sharpening angle and secure it. Using C-Clamps, attach a suitable wood scrap to the table. See Figure 22. This acts as an auxiliary table to support the workpiece. This table should be 1⁄16" away from the belt. It may be necessary to cut a notch in your auxiliary table to achieve this clearance.

Figure 22. False table for sharpening support.

 

 

 

 

G1013 Combination Sander

-19-

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Combination Sander Page Table Of Contents Safety Instructions For Power Tools SafetyAMP Rating Additional Safety Instructions For Sanders Circuit Requirements Fusing110V Operation Grounding Extension CordsCommentary IntroductionOverview of parts G1013 Combination Sander UnpackingHardware Qty Parts InventorySite Consideration Clean UpAssembly Assembly ProcessOverview Inspecting pulley alignment See Figure ⁄16 Gap Belt Tracking AdjustmentsBelt Table Tilt Belt ReplacementDisc Table Tilt Disc ReplacementTest-Run OperationsContour sanding G1013 Combination Sander General Sanding Contour SandingSharpening Inside SandingMaintenance GeneralLubrication Maintenance Notes Closure Machine Data Sheet Page Parts List Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC

G1013 specifications

The Grizzly G1013 is a remarkable woodworking tool that caters to both amateur carpenters and seasoned professionals. Designed with precision and durability in mind, the G1013 stands out as a reliable band saw known for its outstanding performance and versatility.

One of the main features of the Grizzly G1013 is its powerful 1 HP motor, which delivers sufficient torque and speed for slicing through a variety of materials, including hardwoods, plywood, and softwoods. The saw operates at two speed settings, 1,500 and 3,000 feet per minute, allowing users to adjust according to their specific cutting needs. This adaptability makes the G1013 suitable for different projects, whether for fine woodworking or more substantial cutting tasks.

The Grizzly G1013 is equipped with a precision ground cast iron table, which measures 14 inches by 14 inches, providing a stable work surface. The table itself can be tilted up to 45 degrees, enabling users to make angled cuts with ease. A sturdy, locked fence system enhances the cutting experience by allowing accurate, repeatable cuts, essential for delicate projects that require precision.

One of the standout characteristics of the G1013 is its heavy-duty construction. The steel frame enhances stability during operation, reducing vibrations, which is crucial for maintaining cutting accuracy. Additionally, the saw features a high-quality blade guard that ensures safety while facilitating the ease of changing blades.

Technically, the Grizzly G1013 boasts a maximum cutting height of 6 inches and a throat depth of 13.5 inches, making it capable of handling various stock sizes. It accommodates a range of blade sizes, typically from 1/8 inch to 3/4 inch wide, allowing woodworkers to switch between blades depending on the intricacy of their projects. This flexibility is further enhanced by the quick-release blade tension lever, which makes it easy to change blades without hassle.

In terms of safety features, the G1013 includes an emergency stop switch, ensuring that the machine can be powered down quickly if needed. This attention to safety is essential in woodworking environments where accidents can occur.

Overall, the Grizzly G1013 combines power, precision, and practicality in one efficient package. It is an exceptional choice for anyone looking to elevate their woodworking projects, providing not just the essential functionalities but also the reliability needed for consistent performance over time. Whether you’re crafting intricate designs or tackling substantial woodworking projects, the G1013 meets and exceeds expectations.
Top Page Image Contents