Grizzly G1013 instruction manual Safety Instructions For Power Tools

Page 4

SECTION 1: SAFETY

For Your Own Safety Read Instruction Manual Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substi- tute for proper accident prevention measures.

 

 

 

 

 

 

 

 

Indicates an imminently hazardous situation which, if not

 

 

 

 

 

 

 

 

avoided, WILL result in death or serious injury.

 

 

 

 

 

 

 

 

Indicates a potentially hazardous situation which, if not

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

avoided, COULD result in death or serious injury.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Indicates a potentially hazardous situation which, if not

 

 

 

 

 

 

 

 

avoided, MAY result in minor or moderate injury. It may also

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

be used to alert against unsafe practices.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTICE

 

This symbol is used to alert the user to useful information

 

 

about proper operation of the equipment.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Safety Instructions For Power Tools

1.KEEP GUARDS IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning on.

3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

4.NEVER USE IN DANGEROUS ENVI- RONMENT. Do not use power tools in damp or wet locations, or where any flam- mable or noxious fumes may exist. Keep work area well lighted.

-2-

5.KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area.

6.MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.

7.NEVER FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE RIGHT TOOL. Do not force tool or attachment to do a job for which it was not designed.

G1013 Combination Sander

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Combination Sander Page Table Of Contents Safety Safety Instructions For Power ToolsAMP Rating Additional Safety Instructions For Sanders Fusing Circuit Requirements110V Operation Grounding Extension CordsIntroduction CommentaryUnpacking Overview of parts G1013 Combination SanderParts Inventory Hardware QtyClean Up Site ConsiderationAssembly Process AssemblyOverview Inspecting pulley alignment See Figure ⁄16 Gap Adjustments Belt TrackingBelt Replacement Belt Table TiltDisc Replacement Disc Table TiltOperations Test-RunGeneral Sanding Contour Sanding Contour sanding G1013 Combination SanderInside Sanding SharpeningGeneral MaintenanceLubrication Maintenance Notes Closure Machine Data Sheet Page Parts List Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC

G1013 specifications

The Grizzly G1013 is a remarkable woodworking tool that caters to both amateur carpenters and seasoned professionals. Designed with precision and durability in mind, the G1013 stands out as a reliable band saw known for its outstanding performance and versatility.

One of the main features of the Grizzly G1013 is its powerful 1 HP motor, which delivers sufficient torque and speed for slicing through a variety of materials, including hardwoods, plywood, and softwoods. The saw operates at two speed settings, 1,500 and 3,000 feet per minute, allowing users to adjust according to their specific cutting needs. This adaptability makes the G1013 suitable for different projects, whether for fine woodworking or more substantial cutting tasks.

The Grizzly G1013 is equipped with a precision ground cast iron table, which measures 14 inches by 14 inches, providing a stable work surface. The table itself can be tilted up to 45 degrees, enabling users to make angled cuts with ease. A sturdy, locked fence system enhances the cutting experience by allowing accurate, repeatable cuts, essential for delicate projects that require precision.

One of the standout characteristics of the G1013 is its heavy-duty construction. The steel frame enhances stability during operation, reducing vibrations, which is crucial for maintaining cutting accuracy. Additionally, the saw features a high-quality blade guard that ensures safety while facilitating the ease of changing blades.

Technically, the Grizzly G1013 boasts a maximum cutting height of 6 inches and a throat depth of 13.5 inches, making it capable of handling various stock sizes. It accommodates a range of blade sizes, typically from 1/8 inch to 3/4 inch wide, allowing woodworkers to switch between blades depending on the intricacy of their projects. This flexibility is further enhanced by the quick-release blade tension lever, which makes it easy to change blades without hassle.

In terms of safety features, the G1013 includes an emergency stop switch, ensuring that the machine can be powered down quickly if needed. This attention to safety is essential in woodworking environments where accidents can occur.

Overall, the Grizzly G1013 combines power, precision, and practicality in one efficient package. It is an exceptional choice for anyone looking to elevate their woodworking projects, providing not just the essential functionalities but also the reliability needed for consistent performance over time. Whether you’re crafting intricate designs or tackling substantial woodworking projects, the G1013 meets and exceeds expectations.
Top Page Image Contents