Inventory
After all the parts have been removed from the box, you should have the following items:
Inventory (Figure 3) | Qty | |
A. | Sander Unit | 1 |
B. | Sander Unit Base Plate | 1 |
C. | Sanding Sleeve and Drum 3" | 1 |
D. | Sanding Sleeve and Drum 2" | 1 |
E. | Sanding Sleeve and Drum 11⁄2" | 1 |
F. | Sanding Sleeve and Drum 3⁄4" | 1 |
G. | Sanding Sleeve 1⁄2" | 1 |
|
| |
H. | Spindle Washer 7⁄8" | 1 |
I. | Sanding Sleeve and Drum 1" | 1 |
J. | Throat Plate 1" | 1 |
Hardware Bag 1 |
| |
• | Wrench 9⁄16" | 2 |
• | Spindle Washer 113⁄16" | 1 |
• | Spindle Washer 5⁄8" | 1 |
• | Tap Screw | 4 |
Hardware Bag 2 |
| |
• | Throat Plate 1⁄2" | 1 |
• | Throat Plate 3⁄4" | 1 |
• | Throat Plate 11⁄2" | 1 |
• | Throat Plate 2" | 1 |
• | Throat Plate 3" | 1 |
In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi-
C
F
A
B
D
E
G
ency, replacements can be obtained at your local hardware store.
NOTICE
If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
G0538 Oscillating Spindle Sander
Figure 3. Inventory.
H
I
J