Installing Handwheel
Components and Hardware Needed: | Qty |
Handwheel | 1 |
To mount the handwheel: |
|
1.Place the handwheel over the shaft shown in Figure 11 and tighten the setscrew in the handwheel hub.
Figure 11. Handwheel location.
Dust Collection
This drum sander requires a minimum of 1600 CFM at the sander. We recommend using a dust collection system that produces a minimum of 2000 CFM. A fine layer of dust will be present on your stock as it comes out of the sander. This is normal.
Components and Hardware Needed: | Qty | |
Dust Hoses 4" (not included) | Length Varies | |
Hose Clamps (not included) | Varies | |
Dust Collection System (not included) | 1 | |
To connect the dust ports to a dust collector:
1.Attach 4" dust collection hoses to the dust ports shown in Figure 12 and secure them with hose clamps.