Hach 3650 manual O2 Analyzer PC Connection, Reviewing Instrument Configuration

Page 31

3650 Portable O2 Analyzer - Options Setup	25 of 50

3.2 O2 Analyzer - PC Connection

For the hardware connection of the analyzer to a PC, see “Instrument - PC Connection” on page 10.

The Configuration, Serial port menu lets you choose one of four serial communication ports, as follows:

Usually, COM1 is used to connect to a mouse, so try COM2 first. You may find that a separate SetUp program supplied with your PC is necessary to activate this port.

Click on OK to activate the selected port. If the port you have selected here is adequate, the WinLog97 program will return to the main menu. Otherwise, you will see an RS232 ERRORS message advising you to select another port.

Fig 3-7: Serial Port Configuration

3.3 Reviewing Instrument Configuration

To review if the analyzer is set up as expected, choose the Configuration, Configuration view command. You will see a window like the one illustrated in Fig 3-8.

Fig 3-8: Instrument Configuration

You may change a number of these settings using the WinLog97 program. The modifiable settings, and information relating to these settings are listed in the next section, “Configuring the Instrument” on page 26.

However, should you see any unexpected items listed on your screen which you are unable to correct, please contact your Hach Ultra representative.

Operator Manual

ORBISPHERE

Image 31

Contents Operator Manual Page Product Recycling Information Orbisphere Following only applies to European customers Product DisposalMarking Restriction of Hazardous SubstancesTable of Contents Part Lists Accessories and Attachments Maintenance and TroubleshootingSpecifications CalibrationsRevision History Safety Conventions Safety PrecautionsManual Overview About this ManualService and Repairs Safety RecommendationsAcknowledgements Precautionary LabelsOrbisphere Installation Flow Chamber Installation Sensor InstallationConnections WinLog97 PC Program InstallationExternal Power optional Sample Tube Adapter optionalInstrument PC Connection Electrochemical Sensor Installation Completion Check ListInstrument Clock Setting BatteriesFlow Chamber Storage When not UsedOperating Controls Operating InformationOperating Information 3650 Portable O2 Analyzer Preconditioning Sensor Taking MeasurementsAutomatic Data Acquisition Storing Measurements In the InstrumentManual Data Acquisition Viewing Stored Measurements Storing and Accessing Measurements From the PCDownloading Stored Values Copying Values Altering the Sampling Point DescriptionsPrinting Values Saving ValuesClearing Stored Values Timebase Updating Rate Maximum Samples 10 divisions Monitoring Measurements In Real-TimeOrbisphere Main Menu Basics Options SetupWinlog97 Export Menu O2 Analyzer PC Connection Reviewing Instrument ConfigurationAutomatic Data Acquisition Setting Sampling Intervals Configuring the InstrumentMembrane Selection Select from the PC Selecting Type of CalibrationSensor Calibration Range Checking Locking Out the Instrument’s CAL ButtonEntering a Span Gas Value Change from the PC Dual Use model 3650/113 onlyOrbisphere Pressure Calibration CalibrationsCalibration In a Span Gas Sensor CalibrationCalibration In Line Calibration In Air Calibration Range CheckingAccessories and Attachments Accessories and Attachments 3650 Portable O2 Analyzer Sensor Maintenance and TroubleshootingMaintenance Instrument BatteriesSerial Test TroubleshootingKeyboard Test Display Test Clock SettingsMeasurements View Analog Voltages ViewInstrument Display Options SpecificationsSystem Specifications General Technical DataTheory of Operation Part Lists AccessoriesInstrument Spare Parts Common Units Appendix a GlossaryTerms and Definitions Glossary 3650 Portable O2 Analyzer Tables and Illustrations AnnexAnnex 3650 Portable O2 Analyzer User Notes