Harbor Freight Tools 69474 Assembly Installing the Auxiliary Handles, Setup No rati Ope Maintenan

Page 10

Specifications

y fet Sa

Electrical Rating

120V~ / 60Hz / 10A

 

 

Motor No Load Speed

600-3500 RPM

 

 

Max. Accessory Diameter

7″ (178 mm)

Spindle Thread

5/8″ x 11 TPI

 

Backing Pad

Accessories

Foam Pad

(sold separately)

Polishing Bonnet

 

Sanding Discs

Setup

no rati Ope

ec

Maintenan

Setup - Before Use:

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

To prevent serious injury from accidental operation: Release the Trigger and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

Assembly

Installing the Auxiliary Handles

TO PREVENT SERIOUS INJURY:

Do not operate this tool with one hand only or without the Auxiliary Handle(s) properly installed.

Figure A: Handle Installation Options

This Polisher/Sander includes two types of auxiliary handles. The D-Handle may be installed for either right-hand or left-hand use. The Side Handle can be installed in one of three positions on the head of the Polisher/Sander or together with the D-Handle.

Page 10

For technical questions, please call 1-800-444-3353.

Item 69474

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Polisher/Sander General Power Tool Safety Warnings Table of ContentsWork area safety Safety Electrical safetyPersonal safety Operation MaintenanceFet Sa Power tool use and careService Rati Ope MaintenanSafety Setup Operation Maintenance Kickback and Related Warnings Safety Warnings Specific for Polishing Operations Safety Warnings Specific for Sanding Operations Vibration Safety Double Insulated Tools Tools with Two Prong Plugs Setup No rati OpeGrounded Tools Tools with Three Prong Plugs GroundingExtension Cords SymbologySafety Setup 25′ 50′ 75′Specifications Assembly Installing the Auxiliary HandlesSetup No rati Ope Maintenan Setup Before UseOption 2 Using with the Side Handle Alone Option 1 Using with the D-Handle AloneOption 3 Using with Both Auxiliary Handles Together Fet FunctionsNo rati Ope Maintenan Setup Operation Maintenance Tool Set UpWorkpiece and Work Area Set Up Installing the Backing Pad/Foam PadFet Sa Setup No rati Ope Maintenan PolishingSanding Cleaning, Maintenance, and Lubrication Maintenance and ServicingTroubleshooting Problem Possible Causes Likely SolutionsPart Description Parts ListParts List and Diagram Qty Part DescriptionAssembly Diagram Limited 90 Day Warranty
Top Page Image Contents