Harbor Freight Tools 69474 owner manual Option 1 Using with the D-Handle Alone

Option 1: Using with the D-Handle Alone

Attach the D-Handle alone to the sides of the Front Cover, using the Hex Key and two Hex Head Bolts.

Note: Slide the Hex Key through the hole in the Handle to access the Bolt on the long side of the Handle.

Figure B Safety

Insert Hex Key	Setup
through here
to access Bolt

Figure C: D-Handle Installed

Option 2: Using with the Side Handle Alone

Attach the Side Handle to one of the three locations on the Polisher/Sander head by threading it securely in place.

Install Side Handle Here

Or Here	Operation
Or Here
Figure D

Option 3: Using with Both Auxiliary Handles Together

Hold the D-Handle in place on the head of the Polisher/Sander and thread the Side Handle through the short side of the D-Handle in place of one of the Hex Head Bolts. Use a Hex Head Bolt and the Hex Key to secure the large side of the D-Handle to the other side of the Polisher/Sander head.

Maintenance

Figure E

Item 69474 For technical questions, please call 1-800-444-3353. Page 11