MAINTENANCE
1.Pay particular attention to the SAND HOSE (#24), the NOZZLE SHUT OFF VALVE (#18C), and the NOZZLES
2.The SAND HOSE needs replacing when it’s side walls develop leaks or show blisters in the surface. Do not use if any of these problems are present.
PARTS LIST
Item# | Description | Qty | Item# | Description | Qty | |
1 |
| Tank | 1 | 18B | 3/8" Steel Sand Control Valve | 1 |
2 |
| Wheel | 2 | 18C | 3/8" Steel Shut Off Valve | 1 |
3 |
| Cotter Pin | 3 | 19 | Male/Female Adapter | 1 |
4 |
| Foot | 1 | 20 | 3/8" 1/4" Nipple Connector | 1 |
5 |
| Axle | 1 | 21 | Air Hose | 1 |
6 | * | Handle Bar | 2 | 22 | Sand Outlet Manifold | 1 |
7 |
| Handle Grip | 2 | 23 | Hose Clamp | 2 |
8 |
| Pan Screw | 4 | 24 | Sand Hose | 1 |
9 |
| Hex Nut | 4 | 25 | Hose Adapter | 1 |
10 |
| Safety Valve | 1 | 26 | Gasket | 1 |
11 |
| 1 | 27A | 9/64" Nozzle | 1 | |
12 |
| Tank Cap | 1 | 27B | 1/8" Nozzle | 1 |
13 |
| Joint Pipe | 1 | 27C | 7/64" Nozzle | 1 |
14 |
| Intake Manifold | 1 | 27D | 3/32" Nozzle | 1 |
15 |
| Pressure Gauge | 1 | 28 | Nozzle Cap Nut | 1 |
16 |
| 3/8" Nipple Connector | 5 | 29 | Funnel | 1 |
17 |
| Water Trap | 1 | 30 | Hood | 1 |
18 |
| 3/8" Brass Air Supply Valve | 1 | 31 | Washer | 1 |
18A | 3/8" Brass Throttling Valve | 1 | 32 | Instruction Manual | 1 | |
* Note: Left Handle is
Page #13 | REV 01/01 |