Harbor Freight Tools 90045 Operating Instructions, Power Switch, See Figure E

Page 12

OPERATING INSTRUCTIONS

The Power Switch:

1.To start the Belt Sander, depress the Power Switch (66). To stop the tool, release pressure on the Power Switch. (See Figure E.)

2.To lock the Power Switch (66) in the “ON” position for continuous operation, depress the Power Switch and push in on the Switch Lock. The tool will continue to run. To turn off the tool, squeeze and release the Power Switch once.

(See Figure E.)

3.WARNING! Prior to using the Belt Sander (each time), make sure the Switch Lock mechanism is working properly. Always release the Switch Lock mecha- nism before disconnecting the Belt Sander from its electrical outlet. Failure to do so will cause the tool to start immediately the next time it is plugged into an electrical outlet, resulting in possible injury or property damage. (See Figure E.)

Proper Operation During The Sanding Process:

1. WARNING! When sanding a workpiece, always push and pull the Belt Sander over the workpiece with both hands firmly gripping the tool. Never pass hands or fingers directly in front of, to the rear, or below the Sanding Belt (46).

2.Make sure the workpiece is free from nails and any other foreign objects which could damage the Sanding Belt (46).

3.Make sure the workpiece is supported at all times. Whenever possible, secure the workpiece in a vise or with clamps (not included). If necessary, use a roller stand (not included) with larger workpieces.

4.Plug the Power Cord (14) into the nearest 120 volt, grounded, electrical outlet.

5.Firmly grip the Belt Sander with both hands. Then, squeeze the Power Switch (66) to turn on the tool. If desired, use the Switch Lock to run the Belt Sander in its continuous mode.

6.Allow the Sanding Belt (46) to turn up to full speed before feeding the Sanding Belt into the workpiece.

7.To avoid damaging the workpiece, always sand parallel to the grain of the wood.

SKU 90045

For technical questions, please call 1-800-444-3353.

Page 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Belt Sander For technical questions, please callProduct Specifications General Safety RulesSave this Manual Work AreaElectrical Safety Personal SafetyTool USE and Care Specific Safety Rules ServicePage Grounding Grounded Tools Tools with Three Prong PlugsFigure a Double Insulated Tools Tools with TWO Prong Plugs See Figure BExtension Cords See Figure C, nextSee Figure C Symbology Assembly InstructionsTo Remove/Install a Sanding Belt UnpackingMachined parts near the Tension Adjuster 29 may be Sharp. Wear work gloves when adjusting the tensionTo Attach The Dust Bag Power Switch Operating InstructionsSee Figure E Proper Operation During The Sanding ProcessINSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipmentSee Figure G Front ViewParts List Please Read the Following CarefullyREV 12/04 Diagram SKU 90045 For technical questionsREV 12/04 .

90045 specifications

Harbor Freight Tools is well-known for providing an extensive range of reliable and affordable tools, and one notable product that stands out in their lineup is the Harbor Freight Tools 90045, a versatile 12-inch compound miter saw. It is designed for both novice woodworkers and seasoned professionals, delivering precision and convenience for various cutting applications.

One of the main features of the 90045 is its powerful 15 Amp motor, which provides ample cutting power, enabling it to tackle tough materials with ease. This robust motor allows the saw to achieve an impressive no-load speed of up to 4,500 RPM, ensuring smooth and efficient cuts every time. The dual bevel capability is another exceptional feature, enabling the saw to tilt left and right up to 45 degrees. This flexibility enhances its usability for complicated angles and miter cuts, making it an indispensable tool for crown molding, picture frames, and various carpentry tasks.

The Harbor Freight 90045 also boasts a large, durable, and precision machined aluminum base, offering stability and support during operation. The saw's adjustable miter angles range from 0 to 45 degrees and can be easily set and locked in place, promoting accuracy and efficiency. Furthermore, the laser guide technology is a notable innovation that enhances cutting precision by projecting a clear line of sight onto your workpiece, allowing you to see exactly where the blade will cut.

Safety is also a prime consideration in the design of the 90045. It features a blade guard that automatically retracts while cutting and a safety switch to prevent accidental starts, ensuring a safer work environment. Additionally, the lightweight design of the saw makes it easy to transport to job sites, while the built-in carry handle adds convenience.

Another characteristic that makes the Harbor Freight 90045 a coveted tool is its budget-friendly price point, offering professional-grade features without breaking the bank. Coupled with its extensive warranty, this miter saw is a solid investment for anyone looking to enhance their woodworking capabilities.

In summary, the Harbor Freight Tools 90045 is a powerful and versatile compound miter saw that combines advanced features with user-friendly design. Its robust motor, dual bevel capabilities, laser guide technology, and safety features make it an excellent choice for anyone seeking reliability and precision in their cutting projects. Whether you are a hobbyist or a professional contractor, this miter saw can readily fulfill your needs, making woodworking a more enjoyable and efficient endeavor.
Top Page Image Contents