Harbor Freight Tools 90045 INSPECTION, MAINTENANCE, and Cleaning, Do not use damaged equipment

Page 13

8.Do not force the Belt Sander to remove material faster than it is designed to cut. Push and pull the Sanding Belt (46) gradually along the surface of the workpiece.

9.Once the sanding job is completed, turn off the Belt Sander and wait until the Sanding Belt (46) stops turning. Then, unplug the Power Cord (14) from its electrical outlet.

INSPECTION, MAINTENANCE, AND CLEANING

1.WARNING! Make sure the Power Switch (66) of the Belt Sander is in its “OFF” position and that the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

2.BEFORE EACH USE, inspect the general condition of the Belt Sander. Check for loose screws, misalignment or binding of moving parts, damaged electrical wiring, dull or damaged Sanding Belt (46), and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.

Do not use damaged equipment.

3.CARBON BRUSH: To maintain peak efficiency of the Belt Sander’s Motor it is recommended that every two to six months the Carbon Brush (27) be examined. The Carbon Brush should be free of dust and dirt. The Carbon Brush should be replaced when it has worn down to 3/16” in length. The Carbon Brush should slide freely in and out of the Brush Holder (25) without sticking. To check the Carbon Brush, remove the Brush Holder Cover (28) located at the front of the Belt Sander. Lift out the Carbon Brush to inspect. If cleaning is necessary, rub the Carbon Brush thoroughly with a pencil eraser. Next, clean the Brush Holder opening with compressed air or a clean cloth. Then, replace the Carbon Brush and Brush Holder Cover.

(See Figure G.)

4.TO CLEAN: The ventilation openings should be kept clean and free of sawdust and debris. The most effective way to clean the ventilation openings is with com- pressed air. The outer body may be cleaned with a clean cloth and a mild deter- gent. Do not use solvents. Do not immerse the Belt Sander in liquid.

FRONT VIEW

BRUSH HOLDER COVER (28)

CARBON BRUSH (27)

BRUSH HOLDER (25)

FIGURE G

SKU 90045

For technical questions, please call 1-800-444-3353.

Page 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents For technical questions, please call Belt SanderGeneral Safety Rules Product SpecificationsSave this Manual Work AreaPersonal Safety Electrical SafetyTool USE and Care Service Specific Safety RulesPage Grounded Tools Tools with Three Prong Plugs GroundingSee Figure B Figure a Double Insulated Tools Tools with TWO Prong PlugsSee Figure C, next Extension CordsSee Figure C Assembly Instructions SymbologyTo Remove/Install a Sanding Belt UnpackingSharp. Wear work gloves when adjusting the tension Machined parts near the Tension Adjuster 29 may beTo Attach The Dust Bag Operating Instructions Power SwitchSee Figure E Proper Operation During The Sanding ProcessDo not use damaged equipment INSPECTION, MAINTENANCE, and CleaningSee Figure G Front ViewPlease Read the Following Carefully Parts ListREV 12/04 SKU 90045 For technical questions DiagramREV 12/04 .

90045 specifications

Harbor Freight Tools is well-known for providing an extensive range of reliable and affordable tools, and one notable product that stands out in their lineup is the Harbor Freight Tools 90045, a versatile 12-inch compound miter saw. It is designed for both novice woodworkers and seasoned professionals, delivering precision and convenience for various cutting applications.

One of the main features of the 90045 is its powerful 15 Amp motor, which provides ample cutting power, enabling it to tackle tough materials with ease. This robust motor allows the saw to achieve an impressive no-load speed of up to 4,500 RPM, ensuring smooth and efficient cuts every time. The dual bevel capability is another exceptional feature, enabling the saw to tilt left and right up to 45 degrees. This flexibility enhances its usability for complicated angles and miter cuts, making it an indispensable tool for crown molding, picture frames, and various carpentry tasks.

The Harbor Freight 90045 also boasts a large, durable, and precision machined aluminum base, offering stability and support during operation. The saw's adjustable miter angles range from 0 to 45 degrees and can be easily set and locked in place, promoting accuracy and efficiency. Furthermore, the laser guide technology is a notable innovation that enhances cutting precision by projecting a clear line of sight onto your workpiece, allowing you to see exactly where the blade will cut.

Safety is also a prime consideration in the design of the 90045. It features a blade guard that automatically retracts while cutting and a safety switch to prevent accidental starts, ensuring a safer work environment. Additionally, the lightweight design of the saw makes it easy to transport to job sites, while the built-in carry handle adds convenience.

Another characteristic that makes the Harbor Freight 90045 a coveted tool is its budget-friendly price point, offering professional-grade features without breaking the bank. Coupled with its extensive warranty, this miter saw is a solid investment for anyone looking to enhance their woodworking capabilities.

In summary, the Harbor Freight Tools 90045 is a powerful and versatile compound miter saw that combines advanced features with user-friendly design. Its robust motor, dual bevel capabilities, laser guide technology, and safety features make it an excellent choice for anyone seeking reliability and precision in their cutting projects. Whether you are a hobbyist or a professional contractor, this miter saw can readily fulfill your needs, making woodworking a more enjoyable and efficient endeavor.
Top Page Image Contents