13.WARNING! The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reporductive harm). (California Health & Safety Code 25249.5, et seq.)
14.Some dust created by power sanding, sawing, grinding, drilling, and other con- struction activities, contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chem- icals are:
Lead from
Crystalline silica from bricks and cement or other masonry products Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.)
15.The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Save these instructions.
|
| SPECIFICATIONS |
|
|
|
|
|
| Maximum Operating Pressure | 90 PSI |
|
| Air Consumption | 7 CFM (Cubic Feet Per Minute) |
|
| Air Inlet Size |
| |
| Speed (Max.) | 18,000 RPM |
|
| Activation Method | Paddle Switch with |
|
| Abrasive Belt Size | 13” Long x 3/8” Wide |
|
| Belt Tensioning |
| |
| Sound Level | 93 dBA |
|
| Accessories | Sanding Belts: 80, 120 Grit (1 Each, Included) |
|
|
| 3mm Hex Wrench (Qty. 1) |
|
UNPACKING
When unpacking, check to make sure the item is intact and undamaged. If any parts are missing or damaged, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
REV 08b
SKU 97055 | For technical questions, please call | Page 6 |