Harbor Freight Tools 95088 manual Electrical Safety, Personal Safety

Page 3

ELECTRICAL SAFETY

4.Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.

5.Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in

any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.

6.Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

7.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

8.Do not abuse the Power Cord. Never use the Power Cord to carry the tools or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock.

9.When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These extension cords are rated for outdoor use, and reduce the risk of electric shock.

PERSONAL SAFETY

10.Stay alert. Watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

11.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

12.Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents.

13.Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

SKU 95088

For technical questions, please call 1-800-444-3353.

Page

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Oscillating Spindle Sander For technical questions or replacement parts, please callSKU For technical questions, please call Save This ManualWork Area 236479Personal Safety Electrical SafetyTool USE and Care Specific Safety Rules Grounded Tools Tools With Three Prong Plugs GroundingSee Figure C Double Insulated Tools Tools With Two Prong PlugsExtension Cords See Figure C, next120 or 240 Volt SymbologyNameplate Extension Cord Length FeetUnpacking Installing and Changing Sanding SleevesINSPECTION, MAINTENANCE, and Cleaning TroubleshootingOperation Parts List Record Product’s Serial Number Here Part Description ’tySKU 95088 For technical questions, please call Assembly Diagram 100 101 102 103 104 105 106 107 108 109 110 111 112 Please Read the Following Carefully Limited 1 year / 90 day Warranty

95088 specifications

Harbor Freight Tools has become a well-recognized name in the realm of affordable yet reliable tools. One of their standout products is the Harbor Freight Tools 95088, a versatile and efficient tool that caters to both novice and professional users alike.

The Harbor Freight Tools 95088 is primarily a 12-inch sliding compound miter saw, designed to deliver precision and power in cutting various materials. It is particularly praised for its dual-bevel capabilities, allowing users to make angled cuts in both left and right orientations. This feature is indispensable for complex cuts, making the 95088 an ideal choice for framing, molding, and other intricate woodworking projects.

One of the main highlights of the 95088 is its robust 15-amp motor, which delivers an impressive no-load speed of up to 4,800 RPM. This powerful motor ensures that even thick materials can be cut with ease and efficiency. The saw is equipped with a laser guide system that enhances accuracy, allowing users to see the cut line clearly and make precise adjustments before cutting.

The 95088 also features a large table that provides ample support for long workpieces, coupled with extension wings to further accommodate larger materials. This design enhances stability and helps prevent the material from wobbling during cuts. Additionally, the saw has a positive stop system with commonly used angles, making it easy to switch between different cutting positions without unnecessary adjustments.

In terms of safety, the Harbor Freight Tools 95088 is equipped with a blade guard that covers the blade during operation, reducing the risk of accidents. The electric brake feature stops the blade quickly when the trigger is released, which is crucial for maintaining control.

Another notable characteristic of the Harbor Freight Tools 95088 is its portability. With a lightweight design and built-in carrying handle, the saw is easy to transport to job sites or storage. The saw is ideally suited for contractors, DIY enthusiasts, and hobbyists who require a dependable tool that combines functionality with value.

In summary, the Harbor Freight Tools 95088 offers an impressive array of features, including its powerful motor, dual-bevel capabilities, laser guide, and user-friendly safety features. This makes it a top choice for anyone looking for a reliable miter saw that delivers both performance and affordability.
Top Page Image Contents