Unpacking
This G1140 Edge Sander is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, and the truck and driver are gone, you will need to file a freight claim with the carrier. Save the containers and all packing mate- rials for possible inspection by the carrier or its agent. Without the packing materials, filing a freight claim can be difficult. If you need assis- tance determining whether you need to file a freight claim, or with the procedure to file one, please contact our Customer Service.
The G1140 is a very heavy machine (250 lbs. shipping weight). DO NOT
When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.
NOTICE
Please keep all packaging materials until you are satisfied that the machine is in good condition. Should you need to file a freight claim, the carrier’s agent will require inspection of those materials. Settling a claim can be difficult if packaging is not available.
Piece Inventory
After all the parts have been removed from the carton, you should have:
•Sanding unit
•Sanding Table
•Trunnions (2)
•Table Bracket w/ Lead Screw
•Lead Screw Bracket
•Hand Wheel
•Stabilizing Bracket
•Stabilizing Post
•Lock Handles (2)
•Plastic Knob
•Lever Handle
•Auxiliary Table w/ Post
•Dust Port
•6'' x 80'' Sanding Belt
•Back Stop
•Phillips® Hd Screw
•Feet (4)
•Miter Body
•Hex Bolt 5⁄16"- 18 x 1" (2)
•Flat Washer 5⁄16" (2)
•Flat Washer 3⁄8" (2)
In the event that any non proprietary parts are missing (e.g. a nut or a washer...), we would be glad to replace them, or, for the sake of expedi- ency, replacements can be obtained at your local hardware store.
Figure 2. Overview of all the parts.
|
|
|
|
|
|
|
|
|
|
|
|
G1140 Edge Sander | |||