Harbor Freight Tools 34951 manual Save This Manual, Important Safety Precautions

Page 2

Specifications

 

Disc

 

Belt

 

 

 

 

 

 

 

 

 

 

Size

5”

 

1” x 30”

 

Motor

1/3 HP, 2.4 A, 110 V~,

Speed

3450 RPM

 

3350 FPM

 

 

60 Hz, Single Phase

 

 

 

 

 

 

 

Table

4” x 7-1/4”

 

5” X 5”

 

Weight

17 Pounds

 

 

 

 

 

 

 

Table Tilt

 

45° (both)

 

 

 

 

 

 

 

 

 

Dust Chute

 

1-1/2” (both)

 

 

 

 

 

 

 

 

 

 

Save This Manual

You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product’s serial number in the back of the manual near the assembly dia- gram, or write month and year of purchase if product has no number. Keep this manual and invoice in a safe and dry place for future reference.

IMPORTANT SAFETY PRECAUTIONS

WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS TOOL

1.KEEP WORK AREA CLEAN. Cluttered areas invite injuries.

2.CONSIDER WORK AREA CONDITIONS. Don’t use machines or power tools in damp, wet, or poorly lit locations. Don’t expose to rain. Keep work area well lit. Don’t use tools in the presence of flammable gases or liquids.

3.KEEP CHILDREN AWAY. All children should be kept away from the work area. Don’t let them handle machines, tools or extension cords.

4.STORE IDLE EQUIPMENT. When not in use, tools should be locked up in a dry location to inhibit rust. If possible, store in an area out of reach of children.

5.DON’T FORCE THE MACHINE OR TOOL. It will do the job better and more safely at the rate for which it was intended.

6.USE THE RIGHT TOOL. Don’t force a small tool or attachment to do the work of a larger industrial tool. Don’t use a tool for a purpose for which it was not intended.

7.DRESS PROPERLY. Don’t wear loose clothing or jewelry. They can be caught in moving parts. Protective, electrically non-conductive gloves and non-skid footwear are recommended when working.Wear protective hair covering to contain long hair, preventing it from getting caught in machinery.

SKU 34951

For technical questions, please call 1-800-444-3353.

Page

Image 2
Contents For technical questions or replacement parts, please call Belt/Disc SanderSKU For technical questions, please call Important Safety PrecautionsSave This Manual SKU For technical questions, please call Grounding Extension Cords Grounded Tools Tools With Three Prong PlugsDouble Insulated Tools Tools With Two Prong Plugs See Table a SymbologyNameplate Extension Cord Length 120 or 240 VoltDisc Assembly AssemblyBelt Table Assembly Disc Table AssemblyUSE of the Backstop Installing and Removing Sanding BeltsAdjusting Belt Tracking Part Description ’ty Parts ListPlease Read the Following Carefully SKU 34951 For technical questions, please call Assembly DiagramRecord Product’s Serial Number Here