Troubleshooting
Problem |
| Possible Causes |
| Likely Solutions |
Tool will not start | 1. | No power at outlet. | 1. | Check power at outlet. |
| 2. | Cord not connected. | 2. | Check that cord is plugged in. |
| 3. | Carbon Brushes are worn. | 3. | Replace Carbon Brushes. |
Poor sanding | 1. | Sanding belt worn or clogged. | 1. | Replace sanding belt. |
quality | 2. | Sanding against wood grain. | 2. | Sand along the wood grain. |
3.Sanding belt not held flat 3. Keep surface of sanding belt flat on wood. against the wood grain.
Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/ or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
SKU 97593 | For technical questions, please call | Page 12 |