CDs, Operations, Listening | Panasonic SC-PM28 specification

STOP	,	DEMO	2
		/FF,	3
		/REW	1
(CD 1) ~ (CD 5)			1
(CD 1) ~ (CD 5)

operations	1 OPEN/CLOSE
operations
Listening	Label must face upward.
Listening
		Disc tray
	2	CD	CD indicator
	2	CD

Track number

Elapsed play time

3 VOLUME

DOWN UP

CDs

This unit can play WMA, MP3 and CD-DA (digital audio) format audio CD-R and CD-RW that have been finalized (a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW) upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording.

The unit contains five CD trays.

You can simply listen to the CD on a single tray, or you can select and listen to the CD in a particular tray. See the section on All-Disc play (\ page 14) for information on how to listen to all the CDs one after the next.

Listening to the CD on a single tray

1 Press [c OPEN/CLOSE] to open the disc tray and insert the CD.

The unit comes on automatically and tray 1 opens. Press [c OPEN/CLOSE] again to close the tray.

2 Press [CD 2/J] to start play.

The selected CD is played from the first track to the last track in order. After the last track, the player stops automatically.

3 Adjust the volume.

To stop the disc

Press [STOP L, –DEMO].

To pause play

Press [CD 2/ J]. Press [CD 2/ J] again to resume play.

Skipping tracks

Press [g 4/REW] (backward) or [f 3/FF ] (forward).

Searching through tracks

During play or pause

Press and hold [g 4/REW] (backward) or [f 3/FF] (forward).

CD indicator

The CD indicator on the display lights whenever the tray is in the playing position whether it is loaded or not.

One touch play

If the unit is in standby mode and a CD is loaded, press [CD 2/ J] or [CD 1] ~ [CD 5].

The unit will come on automatically and play will start.

ACD selection and care

With this system, you can only play CDs having this mark. (a)

Do not;

•use irregularly shaped CDs. (b)

•attach extra labels and stickers.

•use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. (c)

•attach scratch-proof covers or any other kind of accessory.

•write anything on the CD.

•clean CDs with liquids. (Wipe with a soft, dry cloth.)

•use CDs printed with label printers available on the market.

RQT6885

A a

To prevent damage

Always observe the following points.

•Set the system on a flat, level surface.

Do not set it on top of magazines, inclined surfaces, etc.

•Do not move the system while tray is opening/closing, or when loaded. Always unload all CDs before moving the system.

•Do not put anything except a CD in the tray.

•Do not use cleaning CDs or CDs which are badly warped or cracked.

•Do not disconnect the power cord from the household AC outlet during CD changing operation.

operations

Listening

CDs