replaced by an authorized service center unless otherwise indicated elsewhere in t h i s
instruction manual. Have defective switches replaced by authorized service center. Don't use tool if switch does not turn it on and off.
19.GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded sur- faces. For example; pipes, radiators, ranges, refrigerator enclosures.
20.REPLACEMENT PARTS. When servicing, use only identical replacement parts.
SAVE THESE INSTRUCTIONS.
VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified o n the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY t o the user - as well as damage t o the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltage less than the nameplate rating i s harmful t o the motor.
How to use
Switch action
To start the tool, simply pull the trigger. Release the trigger to stop.
For continuous operation without having to keep your finger on the trigger, just pull the trigger and then push in the lock button with your thumb. To stop the tool from the lock position, simply pull the trigger again and release it.
Sanding tips
Switch on the tool and let it run at top speed before applying to work surface. Press belt only lightly upon work: Belt sander allows pinpoint sanding in close quarters. Remove side grip as in photo (Fig. 2) for tight spots.
Fig. 1
~
Fig. 2
3