Maintenance

CAUTION :

Always be sure that the tool is switched off and unplugged before attempting t o perform inspection or maintenance.

Replacing carbon brushes

Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark. Keep the carbon brushes clean and free t o slip in the holders. Both carbon brushes should be replaced a t the same time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps.

Limit mark

I	\	Brush holder cap
	LScrewdriver

'To maintain product SAFETY and RELIABILITY, repairs, nay other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.