VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltage less than the nameplate rating is harmful to the motor.
ADDITIONAL SAFETY RULES
1.Hold the tool firmly with both hands.
2.Make sure the belt is not contacting the workpiece before the switch is turned on.
3.Keep hands away from rotating parts.
4.Do not leave the tool running. Operate the tool only when
5.This tool has not been waterproofed, so do not use water on the workpiece surface.
SAVE THESE INSTRUCTIONS.
4