Delta 31-120 instruction manual Disc Sander with Integral Dust Collection

Page 1

24259

12" Disc Sander with Integral Dust Collection

INSTRUCTION MANUAL

PART NO. 900657 (011)

To learn more about DELTA MACHINERY	RTD10000119AA
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Contents Disc Sander with Integral Dust Collection Always Wear EYE Protection Safety RulesSpecifications Additional Safety Rules for Disc SandersAssembly Instructions Unpacking and CleaningInstalling Dust Hose Fastening Sander to Supporting SurfacePower Connections Connecting Disc Sander to Power SourceMotor Specifications Grounding InstructionsLocking Switch OFF Position Operating Controls and AdjustmentsStarting Stopping Sander Adjusting Miter Gage Slot Parallel With the Abrasive Disc Tilting the Table and Adjusting the 45 Degree Positive Stops Manual Disc Brake Using the Disc Sander MaintenanceSanding and END Sanding with Accessory Miter Gauge Page PARTS, Service or Warranty Assistance