Craftsman 315.115042 Make Sure Your Extension Cord is in Good, Keep Hands Away FRO Sanding Area

Page 4

•PROTECTYOUR HEARING, Wear haaring protection duringextended periodsof operation.

•DON'TABUSE CORD. Never cam/tool by cordor yank itto disconnectfrom receptacle. Keep cord from heat, oil and sharp edges,

BSECURE WORK. Use clamps or a vise to hold work. It'ssafer than usingyour hand and it frees both hands to operate tool.

•DON'TOVERREACH. Keepproperfooting and balance at all times, Do not use on a ladder or unstable

support,

•MAINTAIN TOOLS WITH CARE. Keep tools sharpand clean for Petterand safer performance. Follow instructionsfor lubricatingand changing accessories.

•DISCONNECT TOOLS. When not in use, before

servicing,or when changing attachments, blades, bits, cutters,etc., all tools shouldbe disconnectedfrom

power supply.

•REMOVE ADJUSTING KEYS AND WRENCHES. Form habitof checking to see that keys and adjusting wrenches are removed from tool beforeturning it on.

•MAKE SURE YOUR EXTENSION CORD IS IN GOOD

CONDITION. When using an extensioncord, be sure to use one heavy enough to carry the current your product will draw. An undersizedcord will cause a drop in line voltage resultingin loss of power and overheating,A wire gage size (A.W,G.) of at least 16 is recommended for an extension cord 100 feet or less in length,A cord exceeding 10O feat is not recommended. If in doubt, use the next heavier gage. The smallerthe gage number,the heavierthe cord,

=OUTDOOR USE EXTENSION CORDS, Whentool is used outdoors,use onlyextension cords intendedfor use outdoorsand so marked, Outdoorapprovedcords are marked with the suffix W-A, for example - SJ'n/V-Aor SJOW-A,

BNEVER USE THIS OR ANY POWER SANDER FOR WET SANDING, Failure to comply can result in electricalshock causing serious injuryor worse.

•KEEP HANDS AWAY FRO• SANDING AREA.

•INSPECT TOOL CORDS PERIODICALLY and if damaged, have repaired at an authorizedservice center. Stay constantlyaware of cord location.

BCHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged shouldbe carefully checked to determine that itwill operate properlyand peflorm its intended function,Chack for alignmentof moving parts, bindingof moving parts, breakage of parts, mounting,and anyother conditions that may affect itsoperation. A guard or other part that

is damaged shouldbe preperly repaired or replaced by an authonzed service center unlessindicated

elsewhere in this instructionmanual.

•NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparkingof the motorcould ignitefumes.

•INSPECT EXTENSION CORDS PERIODICALLY and replace if damaged,

•STAY ALERT. Watch what you are doingand use commonsense. Do not operate tool when you are tired.

Do not rush.

•KEEP HANDLES DRY, CLEAN, AND FREE FRO• OIL AND GREASE. Always use a clean clothwhen cleaning, Never use brake fluids, gasoline, petroleum-

based productsor any strong solventsto clean your tool.

•AVOID ACCIDENTAL STARTING. Don'tcarry tool with finger on switch.Be sure switch is off when pluggingin,

•DO NOT USE TOOL IF SWITCH DOES NOTTURN IT ON AND OFF. Have defective switchesreplaced by an authorizedservice canter.

•INSPECT FOR and remove all nails from lumberbefore sanding.

•DRUGS, ALGOHOI., MEDICATION. Do not operate tool while under the influenceof drugs, alcohol, or any medication.

lWHEN SERVICING USE ONLY IDENTICAL CRAFTSMAN REPLACEMENT PARTS.

•POLAR_ED PLUGS. To reduce the risk of electric shock,this tool has a polarizedplug (one blade is wider than the other). This plug willfit in a polarized outlet only one way, If the plug does not fit fully in the outlet, reverse the plug.If it still does not fit, contact a qualified electricianto installthe properoutlet. Do not change the plug in any way.

•SAVE THESE INSTRUCTIONS. Review them frequentlyand use them to instructothers who may use this tool. If you loan someonethis tool, loanthem these instructionsalso.

A WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicalsknownto cause cancer, birth defects or other reproductive harm. Some examples of these chemicalsare:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically- treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

SAVE THESE INSTRUCTIONS

Page 3 Page 5
Image 4
Page 3 Page 5
Contents OwnersManual In. Disc Sander Double Insulated Product Specifications Full ONE Year Warranty on Craftsman Disc SanderRead ALL Instructions Symbol Meaning Safety Alert SymbolDouble Insulation Make Sure Your Extension Cord is in Good Keep Hands Away FRO Sanding AreaKnow Your Sander Electrical ConnectionBlack Handle BACK-UPDISC BACK-UPPADGearhousing Auxiliary HandleSpindle Lock Buiion Spindlelock ButtonTo Release LOCK-ON Feature DepressswitchtriggerandswitchactuatortoInstalling Sanding Disc HandleSanding FlangenutDonotaitemptto Useasabenchtool Lubrication Extension CordsGeneral Page Optional Handle Assembly Craftsman Disc Sander Model Number KEY Part Number Description QuanRegistered Ttademk I TM Trademark ofSears, ROebuCk and Co

315.115042 specifications

The Craftsman 315.115042 is a versatile and essential power tool in any DIY enthusiast or professional's toolkit. Known for its reliability and robust performance, this electric drill has become a staple for various tasks, ranging from household projects to larger construction jobs.

One of the main features of the Craftsman 315.115042 is its powerful motor, which provides ample torque and speed for drilling through a variety of materials, including wood, metal, and plastic. With a variable speed control, users can easily adjust the drilling speed according to the task at hand, ensuring precision and efficiency. The drill typically offers a range of speeds, allowing for both high-speed drilling and slower, controlled operations for the more delicate tasks.

Another noteworthy aspect of the Craftsman 315.115042 is its lightweight and compact design. This feature enhances portability and decreases user fatigue, especially during extended use. The ergonomic grip ensures comfort, allowing users to maintain control and stability while operating the drill. Additionally, the drill often comes with a keyless chuck, which promotes convenience by allowing for quick and easy bit changes without the need for additional tools.

The Craftsman 315.115042 also incorporates safety technologies that provide added assurance during use. Its built-in safety features prevent accidental operation, ensuring that the tool is only activated when intended. Furthermore, the drill is designed with heat dissipation in mind, preventing overheating during prolonged use.

Durability is a characteristic that Craftsman tools are known for, and the 315.115042 is no exception. Constructed from high-quality materials, it is designed to withstand the rigors of regular use. Whether you are tackling home improvements or professional tasks, this drill promises to remain a reliable companion in your toolkit.

In summary, the Craftsman 315.115042 is a powerful, user-friendly, and durable electric drill that meets the demands of diverse drilling tasks. Its combination of variable speed control, lightweight design, keyless chuck, and safety features make it an excellent choice for anyone looking to invest in a quality drilling tool for various applications.
Top Page Image Contents