ORBITALMOTION
Orbitalmotionisideal for fast cutting action when removing old finishes, smoothing rough wood, cutting stock down to required dimensions, or for finishing surfaces to be painted. As shown in figure 6. the sandpaper moves in tiny circles at a very high speed, a_iowi_ the sander to move easily.
Fig. 6
DUSTLESS SANDING
The dust bag $ocatad on the rear ot your sandeT provides a dust collection system for your sander. Sanding dust is drawn up through the holes of the cushion and collects in the dust bag during sanding operafion. For more efficient operation, empty dust bag when half full.
TO EMPTY DUST BAG
•Unplug your sander.
_k WARNING: Failure to unplug your sander could result in accidental starting causing passible serious persouat in)uPj.
•Unzip dust bag.
•Shake dust bag to empty.
•_Zi_ dust bag up after emptying.
| DUSTBAG |
TO REMOVE |
|
DUSTBAG | Fig. 7 |
•Slide dust bag retainer from sander as shown by the arrow in figure 7. Note: Grooves on dust bag retainer align with grooves on your sander,
•Empty dust bag.
TO INSTALL DUST BAG
See Figure 8.
•Unplug your sander.
_k WARNING: Failure to unplug your sender could rssuStin accidenta$ stadin 9 ss,usk_j possible
sedous personal injury.
DUST BAG
TO REMOVE DUST BAG FOR EMPTYING OR CLEANING
See Figure7.
•Unplugyour sander.
_, WARNING: Failure to unplug your sander could result in accidental starting causing possible
sedous personal injury.
| DUST BAG |
| RETAINERGROOVES |
GROOVES |
|
ON SANDER | Fig. 8 |
•Realign grooves on dust bag retainer with grooves on your sander,
•Slide dust bag assembly into place as shown by the arrow in figure 8.
9