KNOW YOUR SANDER
See Figure I.
Before attempting to use your sander, familiarize yourself with all operating features and safety requirements.
VARIABLESPEEDSWITCH (MODELNO. 315.279570ONLY)
|
|
| |
DUSTBAG |
| SLIDESWITCH |
|
|
|
| |
ASSEMBLY |
|
|
|
| SANDINGDISC | BACKINGPAD | Fig. 1 |
|
|
Your sander has a comfortable palm grip that provides easy handling and positive control. It is suitable for sanding with coarse, medium, and fine grit sanding discs. It produces a fine scratch free finish when used to sand with the grain on wood surfaces. It has also been designed so that flush sanding is possible.
SWITCH
See Figure 2.
TO DECREASE
SPEED
DIALTO
'TURNOFF
TO INCREASE
SPEED
oo
o o
TO
TURN ON
This sander is equipped with a simple switch control. To turn your sander ON, slide the switch in the direction shown by the arrow in figure 2. To turn your sander OFF, slide the switch in the opposite direction as shown by the arrow in figure 2.
VARIABLE SPEED SWITCH
(Model No, 315,279570 only) See Figure 2.
The variable speed feature on Model No. 315.279570 allows your sander to operate at speeds that can be adjusted by rotating the dial on the variable speed switch from A to F. The dial is conveniently located on the motor housing, allowing operator control of disc speed. To increase sanding disc speed, turn the dial on the variable speed switch to a higher setting. Turn dial to a lower setting to decrease sanding disc speed.
__ON-OFFSLIDESWITCH
TOPVIEW OF MODELNO. 315,279570 Fig. 2
7