Chicago Electric 90045 operating instructions Symbology, 25’ 50’ 75’ 100’ 150’

Page 8

8.Protect the extension cords from sharp objects, excessive heat, and damp or wet areas.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

(120/240 VOLT)

NAMEPLATE

AMPERES

(at full load)

0 – 2.0

2.1– 3.4

3.5– 5.0

5.1– 7.0

7.1– 12.0

12.1– 16.0

16.1– 20.0

TABLE A

EXTENSION CORD

LENGTH

25’	50’	75’	100’	150’
18	18	18	18	16
18	18	18	16	14
18	18	16	14	12
18	16	14	12	12
18	14	12	10	-
14	12	10	-	-
12	10	-	-	-

*Based on limiting the line voltage drop to five volts at

150% of the rated amperes.

Symbology

Double Insulated

Canadian Standards Association

	Underwriters Laboratories, Inc.

V~	Volts Alternating Current
A	Amperes
	Amperes

n0 xxxx/min.	No Load Revolutions per Minute
n0 xxxx/min.	(RPM)

SKU 90045

For technical questions, please call 1-800-444-3353.

Page 8

Image 8

Contents For technical questions or replacement parts, please call Belt SanderContents Save all warnings and instructions for future reference General Power Tool Safety WarningsSave This Manual Increased risk of electric shock if your body is grounded Belt Sander Safety Warnings Vibration Safety Extension Cords GroundingDouble Insulated Tools Tools with Two Prong Plugs Symbology 25’ 50’ 75’ 100’ 150’Specifications AssemblyTo Remove/Install a Sanding Belt Adjustments to the toolWork Piece and Work Area Set Up Tool Set UpOperating Instructions To Attach The Dust BagSKU For technical questions, please call See Figure D Maintenance ServicingCleaning, Maintenance, Lubrication Troubleshooting Problem Possible Causes Likely SolutionsRecord Product’s Serial Number Here Parts ListPart Description For technical questions Please callLimited 1 year / 90 Day Warranty