Bush Hog MP6 manual MP5/6, Table of Contents

MP5/6

Operator’s Manual

TABLE OF CONTENTS

SECTION/PARA PAGE SECTION/PARA PAGE

	Warranty		3
	Dealer Preparation Check List		4
	Safety Precautions		5
	Federal Laws and Regulations		6
I	INTRODUCTION AND DESCRIPTION		7
	1-1 Introduction		7
	1-2 Description		7
II	PREPARATION FOR USE		8
	2-1 Attaching to Tractor		8
III	OPERATING INSTRUCTIONS		10
	3-1	General Safety	10
	3-2	Cutting Height Adjustment	10
	3-3	Operation	10
	3-4	Transporting	10
	Tips On Mulching		11

IV	MAINTENANCE		12
	4-1 Maintenance Check List		12
	4-2 Lubrication		12
	4-3 Belt Adjustment		13
	4-4 Belt Replacement		13
	4-5	Blade Replacement	14
	4-6	Blade Spindle Service	15
	4-7	Troubleshooting	16
V	DEALER ASSEMBLY		17
	5-1	Base Unit Assembly	17
	Safety Decals		19
	Torque Specifications		20

RETAIL CUSTOMER’S RESPONSIBILITY UNDER THE BUSH HOG WARRANTY

It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to operate, lubricate, maintain and store the product in accordance with all instructions and safety procedures. Failure of the operator to read the Operator’s Manual is a misuse of this equipment.

It is the Retail Customer and/or Operator’s responsibility to inspect the product and to have any part(s) repaired or replaced when continued operation would cause damage or excessive wear to other parts or cause a safety hazard.

It is the Retail Customer’s responsibility to deliver the product to the authorized Bush Hog Dealer, from whom he purchased it, for service or replacement of defective parts which are covered by warranty. Repairs to be submitted for warranty consideration must be made within forty-five (45) days of failure.

It is the Retail Customer’s responsibility for any cost incurred by the Dealer for travel- ing to or hauling of the product for the purpose of performing a warranty obligation or inspection.

2