Buffalo Tools PS07401 operating instructions Maintenance, Accessories

Page 12

MAINTENANCE

Disconnect the power supply before cleaning. Wear safety eyewear before cleaning. Used compressed dry air to blow off dust and debris. Use a soft bristle brush if compressed air is not available.

Applying excessive force to the tool can overload the motor, decrease the life and increase the wear on the tool.

Some chemicals can damage the product. Do not use harsh chemicals such as gasoline, carbon tetrachloride, paint thinner, etc.

A qualified repair technician must perform any tool service or repair. Service or maintenance performed by unqualified personnel could result in injury. Use only identical replacement parts. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.

Do not make contact with a grounded surface while using this power tool. Contact with surfaces like pipes, radiators or major appliances increases your risk of electric shock.

Keep construction debris out of vents and triggers by blowing with compressed air.

Use only mild soap and a slightly damp cloth to clean the Polisher / Sander.

This motor uses carbon brushes, which may require replacing. Carbon brushes wear out over time, and could create motor trouble. Keep carbon brushes free and clear of debris, and replace worn parts when necessary.

ACCESSORIES

All accessories used with this tool must be rated for 200 – 3,350 RPM. Select accessories that are appropriate for the material for which they will be used. The wool polishing bonnet included with this tool is useful for polishing vehicles.

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

Always attach grounded (3-prong) extension cords to grounded (3-prong) outlets.

If you must use an extension cord, be sure that the gauge is large enough to carry the amount of current necessary for your power tool. If not, your tool may experience a loss of power, excessive voltage drop or overheating. The smaller the gauge number, the heavier the cord.

(201402)

PS07401 7-Inch Polisher / Sander Assembly & Operating Instructions

12

Image 12
Contents PS07401 Inch 177.8mm Polisher / Sander Features SpecificationsFor Consumer USE only not for Professional USE Table of Contents General Safety Rules for ALL Electric Power Tools Important Safety Instructions Work Area Electrical SafetyTool USE & Care Flammable materials Service Important Safety Instructions Specific Safety Rules AND/OR SymbolsFunctional Description Package Contents Assembly Components ListInstalling the Rubber PAD Installing the Polishing BonnetOperation Polisher Operation Sander OperationMaintenance Accessories