Accessories
PART NO. | DESCRIPTION |
Spall Shield | |
056415 | Goggles |
056485 | Brush, 1/4" |
056486 | Brush, 5/8" |
103754 | Hex Wrench 3/16" |
For Parts and Accessories, please contact your dealer or distributor. If they are unable to satisfy your requirements, please contact DESA International at the locations as stated on back page.
Tool Disassembly and Assembly
!WARNING: Always unload a powder actuated tool before disassembling, replacing barrel, cleaning, or assembling.
DISASSEMBLY
1.a) Remove tang cap, tang spring, and tang. Slide barrel assembly from receiver.
Barrel Assembly | Receiver |
Tang
Tang Spring
Tang Cap
2.Remove upper screws from handle and trig- ger assembly. Slide receiver from handle and trigger assembly. Remove firing pin and firing pin spring. Sear and sear spring will fall out when firing pin is removed.
Receiver | Firing Pin Spring | Screws |
|
Sear Spring |
|
Sear | Firing Pin |
|
Handle and Trigger Assembly
b)Remove muzzle cap from barrel by un- screwing counterclockwise.
Muzzle Cap | Barrel |
c)Insert a rod or screwdriver into barrel slot and push piston and buffer out of barrel.
3.Insert the barrel back into the receiver and press down. This will release the stop pin. Remove the stop pin. Remove barrel, breech, and breech spring from receiver.
Stop Pin
Breech
Barrel
PistonBarrel
Buffer
101437
Breech Spring
Receiver
Barrel Slot
19