Mounting Instruction

Figure 1 illustrates the charger mounting brackets.

Figure 2 illustrates surface mounting of the charger to the

Fender well. If using the nut and bolt provided, drill two holes between 3/16" and 1/4" in diameter. (For alignment of holes use one of

the brackets as a template.) If the backside of the mounting surface is hard to reach, you may consider using two 1/2" sheet metal screws instead of nut bolt, drill a pilot hole if required, drill holes between 1/8" and 5/32". CAUTION: Do not drill or puncture battery.

Electrical installations - Route and secure supply cord and output wiring away from gas line, carburetor or other hot, sharp or moving and pinch parts to avoid damage to the insulation. Secure the AC cord and plug to a cable or from using a self locking cable tie or equivalent.

Figure No. 3 illustrates mounting of the charger alongside the battery of your automobile. If convenient place the charger to the side of the battery away from the engine and fan blades, assemble the brackets as shown in figure No. 4. Loosen the battery retaining hardware enough that you can insert the longer portion of bracket "C" between the bottom of the battery and the battery mounting tray. Align the charger to freely stand without restrictions, then tighten all hardware.

ELECTRICAL CONNECTION

The output leads of the charger are terminated with 3/8 inch ring lugs. Remove the bolts from the battery post connector, insert the bolt through the ring lug then place the bolt back in the battery connector and tighten. Connect the red lead to the positive (+) battery post and the black lead to the negative (-) post.

If you have difficulty connecting the output leads, consult your local auto supply store, they may assist you in finding a connecting device for, your application.

LIMITED WARRANTY

SCHUMACHER ELECTRIC CORPORATION, 7474 NORTH ROGERS AVENUE, CHICAGO, ILLINOIS 60626 MAKES THIS LIMITED WARRANTY TO THE ORIGINAL PURCHASER AT RETAIL OF THIS PRODUCT. THIS LIMITED WARRANTY IS NOT TRANSFERABLE.

Schumacher Electric Corporation warrants this battery charger for two years from date of purchase at retail against defective material or workmanship. If such should occur, the unit will be repaired or replaced at the option of the manufacturer. It is the obligation of the purchaser to forward the unit together with proof of purchase, transportation and/or mailing charges prepaid to the manufacturer or its authorized representative.

This limited warranty is void if the product is misused, subjected to careless handling, or repaired by anyone other than the manufacturer or its authorized representative. The manufacturer makes no warranty other than this limited warranty and expressly excludes any implied warranty including any warranty for consequential damages.

THIS IS THE ONLY EXPRESS LIMITED WARRANTY AND THE MANUFACTURER NEITHER ASSUMES NOR AUTHORIZES ANYONE TO ASSUME OR MAKE ANY OTHER OBLIGATION TOWARDS THE PRODUCT OTHER THAN THIS EXPRESS LIMITED WARRANTY THE MANUFACTURER MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE OF THIS PRODUCT AND EXPRESSLY EXCLUDES SUCH FROM THIS LIMITED WARRANTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LENGTH OF IMPLIED WARRANTY SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

SE-112S specifications

The Schumacher SE-112S is a robust and efficient battery charger designed to meet the needs of automotive enthusiasts and professionals alike. Known for its reliability and advanced technology, the SE-112S stands out in the crowded market of battery maintenance tools.

One of the most pivotal features of the Schumacher SE-112S is its versatility. It is designed to charge a variety of batteries, including standard lead-acid, deep-cycle, and AGM (Absorbent Glass Mat) batteries. This flexibility makes it an ideal choice for both personal and professional use, ensuring compatibility with most vehicle types, from cars and trucks to motorcycles and lawn equipment.

The SE-112S employs a microprocessor-controlled charging system that optimizes the charging process. This technology allows for precise monitoring and adjustment of the charging parameters, resulting in a faster and more efficient charge. The charger automatically adjusts the current output based on the battery’s needs, which helps to prolong battery life and prevent overcharging.

Safety is a paramount consideration in the design of the Schumacher SE-112S. It includes several integrated safety features such as reverse polarity protection, safeguarding against incorrect connections, and short circuit protection, which prevents any potential damage to the battery or charger itself. Additionally, the fully automatic operation adds an extra layer of convenience, allowing users to set the charger and walk away without constant supervision.

The SE-112S is equipped with LED indicators that provide real-time status updates on the charging process. These indicators make it easy to assess the charger’s performance at a glance, keeping users informed of the battery’s condition throughout the charging cycle.

Another notable characteristic of the Schumacher SE-112S is its compact and durable design. This charger is built for portability, making it easy to store and transport, whether in a workshop or on the go. Its rugged construction ensures that it can withstand the rigors of frequent use, cementing its status as a reliable companion for anyone who requires dependable battery maintenance.

In conclusion, the Schumacher SE-112S combines versatility, advanced technology, and safety features to deliver an exceptional charging experience. Whether you are a casual user or a professional, this charger offers the functionality and performance required to maintain vehicle batteries effectively.