Schumacher SE-112S important safety instructions ½AMP

Page 1

PO Box 1368 Effingham, IL 62401 Phone: 217-347-5591 FAX: 217-347-2952

US & Canada Call Toll-Free:800-500-8388 (VETT)

1 ½AMP

 

OWNER’S MANUAL

BATTERY CHARGER & MAINTAINER 12VOLT

WORKING IN VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT EACH TIME BEFORE USING YOUR CHARGER, YOU READ THIS MANUAL AND FOLLOW THE INSTRUCTIONS EXACTLY.

MODEL

SE-112S

Read rules for safe operation and instructions carefully.

GENERAL BATTERY SAFETY

1.Before you use your battery charger, be sure to read all instructions and cautions printed on:

Battery Charger

Battery

Vehicle or unit using battery

2.Use battery charger on LEAD ACID type rechargeable batteries only, such as used in autos, trucks, tractors, airplanes, vans, RV's trolling motors, etc. Charger is not intended to supply power to low-voltage electrical system other than in an automotive application.

WARNING: Do no use battery charger for charging drycell batteries that are commonly used with home appliances. These batteries may burst and cause injury to persons and damage to property.

3.Use only attachments recommended or sold by manufacturer. Use of non-recommended attachments may result in fire, electric shock, or injury.

4.When disconnecting the battery charger, pull by the plug not by the cord. Pulling on the cord may cause damage to cord or plug.

5.Locate battery power cord so it cannot be stepped on, tripped over, or subjected to damage or stress.

6.Do not operate charger with damaged cord or plug. Have cord replaced immediately.

7.Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to a qualified professional for inspection and repair.

8.Do not disassemble charger. Take it to a qualified professional when service or repair is required. Incorrect reassembly may result in electric shock or fire.

9.To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning.

10. Do not use an extension cord unless absolutely necessary.

Use of an improper extension cord could result in fire or electric shock. If an extension cord must be used, make sure that:

Pins on plug of extension cord are the same number, size, and shape as those of plug on charger.

Extension cord is properly wired and in good electrical condition.

Wire size is large enough for AC ampere rating of charger, as specified below:

Length of cord (feet):

25

50

100

150

AWG size of cord:

18

18

18

16

11. Always charge battery in a well ventilated area.

NEVER operate in a closed-in or restricted area without adequate ventilation.

WARNING: Risk of explosive gas.

12.Locate charger as far away from battery as DC charger cables permit.

13.Do not expose charger to rain or snow.

14.NEVER charge a frozen battery. If battery fluid (electrolyte)

is frozen, bring into a warm area to thaw before charging. 15. NEVER allow battery acid to drip on charger when reading specific gravity or filling battery.

16.NEVER set a battery on top of charger.

17.NEVER place charger directly above battery being charged. Gases from battery will corrode and damage charger.

18.NEVER touch the battery clips together when the charger is energized.

19.NEVER crank engine with charger attached to battery, and 120 volt line.

** IMPORTANT SAFETY INSTRUCTIONS **

** SAVE THESE INSTRUCTIONS **

Image 1
Contents ½AMP Ground and AC Power Cord Connections Personal Precautions and SafetyPreparing to Charge Mounting Instruction Light color On/off Condition Operating Instructions

SE-112S specifications

The Schumacher SE-112S is a robust and efficient battery charger designed to meet the needs of automotive enthusiasts and professionals alike. Known for its reliability and advanced technology, the SE-112S stands out in the crowded market of battery maintenance tools.

One of the most pivotal features of the Schumacher SE-112S is its versatility. It is designed to charge a variety of batteries, including standard lead-acid, deep-cycle, and AGM (Absorbent Glass Mat) batteries. This flexibility makes it an ideal choice for both personal and professional use, ensuring compatibility with most vehicle types, from cars and trucks to motorcycles and lawn equipment.

The SE-112S employs a microprocessor-controlled charging system that optimizes the charging process. This technology allows for precise monitoring and adjustment of the charging parameters, resulting in a faster and more efficient charge. The charger automatically adjusts the current output based on the battery’s needs, which helps to prolong battery life and prevent overcharging.

Safety is a paramount consideration in the design of the Schumacher SE-112S. It includes several integrated safety features such as reverse polarity protection, safeguarding against incorrect connections, and short circuit protection, which prevents any potential damage to the battery or charger itself. Additionally, the fully automatic operation adds an extra layer of convenience, allowing users to set the charger and walk away without constant supervision.

The SE-112S is equipped with LED indicators that provide real-time status updates on the charging process. These indicators make it easy to assess the charger’s performance at a glance, keeping users informed of the battery’s condition throughout the charging cycle.

Another notable characteristic of the Schumacher SE-112S is its compact and durable design. This charger is built for portability, making it easy to store and transport, whether in a workshop or on the go. Its rugged construction ensures that it can withstand the rigors of frequent use, cementing its status as a reliable companion for anyone who requires dependable battery maintenance.

In conclusion, the Schumacher SE-112S combines versatility, advanced technology, and safety features to deliver an exceptional charging experience. Whether you are a casual user or a professional, this charger offers the functionality and performance required to maintain vehicle batteries effectively.