Troubleshooting | 15 |
Troubleshooting
Problem | Check point |
|
|
No power | Is the power cord plugged in? |
| Is the power turned on? |
|
|
Tape cannot be ejected | Was the video cassette player’s ¤ button or the 0 |
| EJECT button on the remote control pressed? |
|
|
No picture | Is the TV set to the video channel? |
| Is a cassette loaded? |
| Are the connections correct? |
|
|
No colour | Set the Colour System Output switch according to |
| the recorded tape system. |
|
|
Shuttle search does not function | Is the video cassette player in the playback |
| mode? |
|
|
Disturbances in playback picture | Is tracking adjusted properly? |
| Is the TV adjusted properly? |
| Install this VCP a little way apart from the TV set. |
|
|
Remote control does not function | The batteries are weak. |
| Replace the batteries. |
|
|
Auto playback does not function | The video cassette’s recording safety tab has |
| not been removed. |
|
|
Recording does not function | Are the connections correct? |
| Was the Record button pressed? |
| The video cassette’s recording safety tab is removed. |
|
|
The video cassette player does not | Microcomputer malfunction. |
function properly | Disconnect the power plug from the AC outlet and |
| then |
| The microcomputer will be reset to its initial mode. |
|
|
About Head cleaning
8If the picture playback becomes blurred, it does not mean that the recorded program has
been erased.
8Dirt accumulated on the video heads after long periods of use causes such troubles. In this
case, head cleaning requiring highly technical care is necessary.
8For head cleaning, consult the nearest JVC dealer.
