11
Playback
Playback
NTSC, PAL and MESECAM video tapes
can be played back on this video cassette
player. See “Setting Of The Colour System
Select Buttons” on page 10 for details.
Before proceeding:
●Turn on the power of the TV and video
cassette player.
●Make sure that the TV is set to the video
channel or that the TV’s TV/VIDEO switch
is set to VIDEO (See “Setting the video
channel” on page8 for deta ils).
ALoad a pre-recorded cassette.
If the safety tab on the cassette is
removed, playback will start
automatically.
BPress $ to start playback.
“B.E.S.T. PICTURE SYSTEM” appears
on the screen.(when B.E.S.T. is set to
“ON” . (See “Mode set” 墌pg.9)
8Press ¤ or the remote control’s
8
to
stop playback. Then press ¤ to
remove the cassette.
To fast forward or rewind the tape:
8From the stop mode, press Á or 1 .
Slow motion playback
Slow motion playback is 1/6 of the normal
playback speed. The sound will be cut
during slow motion playback.
During playback:
APress 9 for 2 seconds.
8Press $ to return to the normal
playback speed.
NOTES:
●If the picture shakes during the slow
mode, use TRACKING +/– to correct the
picture.
●After approx. 5 minutes, the slow mode
will disengage to protect the video tape.
Still picture and frame advance
Use this feature to freeze the playback
picture and to advance one frame at a time.
The sound will be cut during this mode.
During playback:
APress 9.
The picture will be frozen.
BPress 9 repeatedly to advance
frames.
Each time the button is pressed the still
picture will advance one frame.
8Press $ to resume normal playback.
NOTES:
●If the picture shakes during the still mode,
use TRACKING +/– to correct the picture.
●After the picture has been frozen for
approx. 5 minutes, the still mode will
disengage to protect the video tape.
12
2
POWER-ON
COLOUR
SYSTEM
STANDBY/REC
SP/LP
/EP
HRP110.book Page 11 Tuesday, August 3, 2004 4:51 PM