Schumacher SE-1250, SE-1010-2 Meter Functions, Percent of Charge, Ammeter, See Meter Views

Page 4

G.

METER FUNCTIONS

 

 

PERCENT OF CHARGE

The percent of charge scale is intended as a visual aid to help simplify detemmining the state of charge. It is scaled for use with the 6 or 10 amp charge rates only. For the 2 amp charge rate, use the red triangle.The percent of charge is based on current draw by the battery. For this reason accuracy will vary with the size and battery type. Typically a 28 ampere hour bat- tery will draw less current at end charge than a 140 ampere hour wet cell battery. This means that the indication for a fully charged large battery may be slightly less than 100%.

For the 2 amp charge rate a red triangle has been provided within the green area of the meter scale. It’s accuracy has been calibrated for use with small battery. As a battery takes on a charge, correspondingly less of the red area will fall under the meter needle.

The Ammeter

The ammeter indicates the amp draw on the charger when a fully discharged battery is con- nected to the charger. The meter will read the maximum output rating of the charger 2 amps, 10 amps, or 30 amps depending on the charger and switch position you have chosen.

The charge on the 2 amp or the 10 amp, will gradually taper down as the battery nears full charge. As the charge current tapers, the ammeter needle will also move down. The 2 amp charge produces such a small current that it will not show up very well on the meter.

The 50 amp boost charge (on the SE-1250 only) may be used for a quick charge prior to using the engine start feature. The meter will indicate around the 30 amps line if the battery is fully discharged and less if the battery is partially charged. Follow duty cycle instructions for this boost position.

See Meter Views

The charger meter needle will indicate somewhere between the solid line and the dotted line when the charging is first started. The variation is due to the difference in battery conditions and construction of the battery. A battery that is not fully charged will not require the charger to begin the charge at the highest rating, such as the 10 amp on the 10 amp charge position. The battery is charged when the meter indicates near the dotted line shown in the view at the right. This is about 1/2 of the selected charge rate. (about 4-5 amps on the 10 amp setting).

2 amp

 

DC AMPS

 

 

 

2 AMP RATE

 

 

 

CHARGE %

 

100

75

50

25

0

2

4

6

8

10

12

10 amp

 

 

DC AMPS

 

 

 

2 AMP RATE

 

 

 

CHARGE %

100

75

50

25

0

2

4

6

8

10

12

50 amp Engine Start

 

 

DC AMPS

 

CHARGING

 

START

0

5

10

15

20

25

30

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents General Battery Safety Length of cord feet 100 150 AWG size of cordPersonal Precautions and Safety Ground and AC Power Cord ConnectionsPreparing to Charge UsesOperating Instruction Charging Battery in Vehicle Operating Instruction Charging Battery OUT of VehicleNegative Grounded Post Positive Grounded PostMeter Functions Percent of ChargeAmmeter See Meter ViewsBattery Charger Controls Battery TypesSwitches TimerBattery Charging Indications of a Fully Charged BatteryCharger Location Precautions Charge PeriodManual DEL Propietario Seguridad General DE LA BateriaPrecauciones Y Seguridad Personales Conexiones a Tierra Y DEL Cordon DE Potencia DE CAControl DE Tiempo Timer Controles Para EL Cargador DE Batería InterruptoresInterruptor DE Circuito Tipos DE Batería

SE-1010-2, SE-1250, SE-1010-2, SE-1012D, SE-1052, SE-1250 specifications

Schumacher has long been recognized for its innovative battery chargers and no line exemplifies this tradition better than the SE series. The SE-1250, SE-1010-2, SE-1012D, and SE-1052 models showcase a blend of technology, efficiency, and user-friendly features that cater to both professional and personal use.

Starting with the SE-1250, this charger offers a powerful 12V output, making it ideal for charging various batteries, including automotive and marine. One of its standout features is the automatic shut-off function, which prevents overcharging and extends battery life. The robust construction and clear LED indicators ensure users remain informed of the charging status.

The SE-1010-2 is another noteworthy model, known for its dual 6V/12V capability. This flexibility allows users to cater to a wider range of battery types. The multi-stage charging process enhances battery health and lifespan, optimizing the charging cycle. Additionally, the compact design facilitates easy transport, making it a suitable option for both home use and on-the-go applications.

The SE-1012D introduces a smart microprocessor-controlled system, which monitors the charging process and adapts the necessary charge according to battery needs. This ensures efficient battery maintenance, reducing the risk of damage. The built-in safety features, such as reverse polarity protection and short circuit prevention, enhance its usability in a diverse range of settings.

The SE-1052 model emphasizes versatility and adaptability with its advanced charging algorithms. This model supports not only standard lead-acid batteries but also AGM (Absorbent Glass Mat) and gel batteries, proving its efficacy across multiple applications. The digital display offers real-time information on voltage, charging time, and battery status, amplifying user experience.

Each model in the Schumacher SE line bears the hallmark of reliability and quality. Their rugged build and intelligent features make them invaluable tools for maintaining battery health, ensuring that users can always count on their devices when needed. Emphasizing safety, efficiency, and versatility, the SE series represents Schumacher's commitment to excellence in battery management technology. Whether for personal or professional use, these chargers offer the technological advancements and robust characteristics necessary for modern battery care.
Top Page Image Contents