Schumacher SS-120A-PE owner manual Schumacher Electric Corporation, General Battery Safety

Page 1

 

 

 

 

 

Battery

SS-120A-PE, 12 Amp

 

 

Charger

Fully Automatic Battery Charger

 

Owner's Manual

Model:

For 12 Volt Marine Deep Cycle &

 

 

Automotive Batteries

 

 

 

 

 

–Save–

Important Safety Instructions

Read Rules for Safe Operation and Instructions Carefully

Working in vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases during normal battery operation. For this reason, it is of utmost importance that each time before using your charger, you read this manual and follow the instructions exactly.

WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

A.

GENERAL BATTERY SAFETY

1.Before you use your battery charger, be sure to read all in- structions and cautions printed on:

Battery Charger

Battery

Vehicle or unit using battery

2.Use battery charger on LEAD-ACID type rechargeable bat- teries only, such as used in automobiles, trucks, tractors, airplanes, vans, RV's, trolling motors, etc. Charger is not intended to supply power to low-voltage electrical system other than in an automotive application.

WARNING: Do not use battery charger for charging dry-cell batteries that are commonly used with home appliances. These batteries may burst and cause injury to persons and damage to property.

3.Use only attachments recommended or sold by manufac- turer. Use of non-recommended attachments may result in fire, electric shock, or injury.

4.When disconnecting the battery charger, pull by the plug, not by the cord. Pulling on the cord may cause damage to cord or plug.

5.Locate battery charger power cord so it cannot be stepped on, tripped over, or subjected to damage or stress.

6.Do not operate charger with damaged cord or plug. Have cord replaced immediately.

7.Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to a quali- fied professional for inspection and repair.

8.Do not disassemble charger. Take it to a qualified profes- sional when service or repair is required. Incorrect reassem- bly may result in electric shock or fire.

9.To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning.

10.Do not use an extension cord unless absolutely necessary. Use of an improper extension cord could result in fire or electric shock. If an extension cord must be used, make sure that:

Pins on plug of extension cord are the same number, size, and shape as those of plug on charger.

Extension cord is properly wired and in good electrical condition.

Wire size is large enough for AC ampere rating of charger, as specified below:

Length of cord (feet):

25

50

100

150

AWG size of cord:

18

18

16

14

 

 

 

 

 

11.Always charge battery in a well-ventilated area. NEVER op- erate in a closed-in or restricted area without adequate ven- tilation.

WARNING: Risk of explosive gas.

12.Locate charger as far away from battery as DC charger cables permit.

13.Do not expose charger to rain or snow.

14.NEVER charge a frozen battery. If battery fluid (electrolyte) is frozen, bring into a warm area to thaw before charging.

15.NEVER allow battery acid to drip on charger when reading specific gravity or filling battery.

16.NEVER set a battery on top of charger.

17.NEVER place charger directly above battery being charged. Gases from battery will corrode and damage charger.

18.NEVER touch the battery clamps together when the charger is energized.

19.NEVER crank engine with SS-120A-PE charger attached to battery.

SCHUMACHER ELECTRIC CORPORATION

801 BUSINESS CENTER DRIVE • MOUNT PROSPECT, ILLINOIS 60056-2179

Send Warranty Product Repairs to: 1025 E. Thompson, Hoopeston, IL 60942-0280

Call Customer Service if you have questions: 1-800-621-5485

00-99-000307/0103

1

Image 1
Contents Schumacher Electric Corporation General Battery SafetyBusiness Center Drive Mount PROSPECT, Illinois Preparing to Charge Personal Precautions and SafetyMarine or MCA Deep Cycle LED Display Battery Charger ControlsBattery Types Operating Instructions Charging Battery OUT of VehicleCircuit Breaker Negative Grounded Post Operating Instructions Charging Battery in VehiclePositive Grounded Post Ground NEGProblem Possible Cause Solution TroubleshootingMAINTENANCE/CLEANING Instructions Business Center Drive Mount Prospect, Illinois Limited WarrantyPrecauciones Y Seguridad Personales Seguridad General DE LA BateriaLongitud del cable pies 100 150 Tamaño AWG del cable LED Display Preparando LA CargaDisyuntor Controles DEL Cargzador DE BateriaTipos DE Bateria Bateria Cargador DE Bateria Cable DE Pulgadas Calibre PositivonegativoNegativo NEG,N Poste Negativo Conectado a TierraDeteccion DE Desperfectos Problema Causa Posible SolucionInstrucciones DE Mantenimiento Y Limpieza Garantia Limitada

SS-120A-PE specifications

The Schumacher SS-120A-PE is a compact and versatile battery charger and maintainer designed for a variety of battery types and applications. Whether for automotive, marine, or other deep-cycle batteries, this unit stands out due to its efficiency and ease of use.

One of the primary features of the SS-120A-PE is its ability to charge 12V lead-acid batteries, including standard flooded, gel, and AGM (Absorbent Glass Mat) types. With a robust charging capacity of 12 amps, the unit can efficiently restore and maintain battery health, ensuring reliable performance for everyday use.

The SS-120A-PE utilizes advanced microprocessor technology, allowing for smart charging and maintenance. This intelligent system automatically adjusts the charging rate as needed, helping to prevent overcharging and extending the lifespan of your batteries. The integrated maintenance mode ensures that the battery stays charged while being left unattended, making it an ideal choice for seasonal vehicles like boats or motorcycles.

Safety features are paramount in the design of the Schumacher SS-120A-PE. It comes equipped with short-circuit, overload, and reverse polarity protection. These features not only safeguard the charger itself but also protect the battery being charged, giving users peace of mind during operation.

Another notable characteristic of the SS-120A-PE is its compact design, which allows it to be easily stored or transported. Weighing in at a manageable size, it is user-friendly and perfect for both home use and professional environments. The built-in LEDs keep users informed of the charging status, with clear indicators for when charging is complete.

Furthermore, this model offers a versatility that resonates with users across a broad spectrum. From jump-starting a vehicle to maintaining the optimal charge of a stored battery, the Schumacher SS-120A-PE is designed to meet varying needs seamlessly.

In conclusion, the Schumacher SS-120A-PE is a feature-rich battery charger and maintainer that stands out in its category. Its intelligent charging technology, safety features, and user-friendly design make it an essential tool for anyone looking to maintain battery health reliably and effectively. Whether it's for personal hobby use or professional maintenance, this unit shines in its capability to deliver consistent performance.