Schumacher SS-120A-PE owner manual Troubleshooting, Problem Possible Cause Solution

Page 6

J.

 

TROUBLESHOOTING

 

 

 

 

If a problem does occur, check the following:

 

 

 

 

 

PROBLEM

 

POSSIBLE CAUSE

SOLUTION

 

 

 

 

Red LED doesn't light

 

Charger is not plugged in.

Plug in.

(Automatic Mode)

 

 

 

 

 

Connections are reversed.

With charger unplugged, reverse clamps and

 

 

 

reconnect. (Rock back and forth to bite in.)

 

 

Poor electrical connection.

Clean clamps and battery posts and reconnect.

 

 

 

(Rock back and forth to bite in.)

 

 

AC outlet is dead.

Plug in a lamp or other appliance to check for

 

 

 

voltage.

 

 

 

 

Charger will not turn ON when

 

Battery voltage is less than one volt

Switch to MANUAL position for a few minutes

properly connected to power.

 

 

 

 

 

Battery recently used in vehicle and is

Battery doesn't need charging

 

 

fully charged

 

 

 

 

 

Charger will not turn OFF.

 

Battery has problem and will not take

Have battery checked.

 

 

full charge.

 

 

 

Two (or more) batteries connected in

Do not charge two batteries at the same time.

 

 

parallel.

 

 

 

Battery of 200 ampere hours or larger.

Requires more time to charge: continue

 

 

 

charging.

 

 

Battery is connected to application that

Requires more time to charge: continue

 

 

draws a small current (such as a

charging.

 

 

vehicle's dome light).

 

 

 

Charger is in manual position.

You MUST unplug battery charger manually.

 

 

 

 

 

 

K.

MAINTENANCE/CLEANING INSTRUCTIONS

 

 

 

 

Very little maintenance is required for the battery charger. Follow common sense in wiping the charger clean and store in a clean, dry area.

1.After use, wipe all battery corrosion and other dirt or oil from clamps, cord, and the charger case. Use a dry cloth.

3.Have any cracked or frayed cords replaced by a qualified professional.

2. Coil charger cords to prevent damage.

4. Store battery charger in a clean, dry area.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents General Battery Safety Schumacher Electric CorporationBusiness Center Drive Mount PROSPECT, Illinois Personal Precautions and Safety Preparing to ChargeMarine or MCA Deep Cycle Battery Charger Controls LED DisplayOperating Instructions Charging Battery OUT of Vehicle Battery TypesCircuit Breaker Positive Grounded Post Operating Instructions Charging Battery in VehicleNegative Grounded Post Ground NEGTroubleshooting Problem Possible Cause SolutionMAINTENANCE/CLEANING Instructions Limited Warranty Business Center Drive Mount Prospect, IllinoisSeguridad General DE LA Bateria Precauciones Y Seguridad PersonalesLongitud del cable pies 100 150 Tamaño AWG del cable Preparando LA Carga LED DisplayControles DEL Cargzador DE Bateria DisyuntorTipos DE Bateria Negativo NEG,N PositivonegativoBateria Cargador DE Bateria Cable DE Pulgadas Calibre Poste Negativo Conectado a TierraInstrucciones DE Mantenimiento Y Limpieza Problema Causa Posible SolucionDeteccion DE Desperfectos Garantia Limitada

SS-120A-PE specifications

The Schumacher SS-120A-PE is a compact and versatile battery charger and maintainer designed for a variety of battery types and applications. Whether for automotive, marine, or other deep-cycle batteries, this unit stands out due to its efficiency and ease of use.

One of the primary features of the SS-120A-PE is its ability to charge 12V lead-acid batteries, including standard flooded, gel, and AGM (Absorbent Glass Mat) types. With a robust charging capacity of 12 amps, the unit can efficiently restore and maintain battery health, ensuring reliable performance for everyday use.

The SS-120A-PE utilizes advanced microprocessor technology, allowing for smart charging and maintenance. This intelligent system automatically adjusts the charging rate as needed, helping to prevent overcharging and extending the lifespan of your batteries. The integrated maintenance mode ensures that the battery stays charged while being left unattended, making it an ideal choice for seasonal vehicles like boats or motorcycles.

Safety features are paramount in the design of the Schumacher SS-120A-PE. It comes equipped with short-circuit, overload, and reverse polarity protection. These features not only safeguard the charger itself but also protect the battery being charged, giving users peace of mind during operation.

Another notable characteristic of the SS-120A-PE is its compact design, which allows it to be easily stored or transported. Weighing in at a manageable size, it is user-friendly and perfect for both home use and professional environments. The built-in LEDs keep users informed of the charging status, with clear indicators for when charging is complete.

Furthermore, this model offers a versatility that resonates with users across a broad spectrum. From jump-starting a vehicle to maintaining the optimal charge of a stored battery, the Schumacher SS-120A-PE is designed to meet varying needs seamlessly.

In conclusion, the Schumacher SS-120A-PE is a feature-rich battery charger and maintainer that stands out in its category. Its intelligent charging technology, safety features, and user-friendly design make it an essential tool for anyone looking to maintain battery health reliably and effectively. Whether it's for personal hobby use or professional maintenance, this unit shines in its capability to deliver consistent performance.
Top Page Image Contents