
1. Troubleshooting Guide
If there is a problem, first refer to this Troubleshooting Guide. If the problem still persists, take the camera to your nearest Canon Service Center. Canon Service Centers are listed on the back of this booklet.
Problem | Probable Cause |
| Solution | Page | ||
| No battery has been | Set the < | > switch to . | 16 | ||
| installed. |
|
|
|
| |
Nothing is | The battery is exhausted. | Replace the battery with a new | 21 | |||
displayed on | ||||||
|
| one. |
| 22 | ||
the LCD panel. |
|
|
| |||
|
|
|
|
| ||
| The battery has been | Load the battery correctly. | 21 | |||
| installed incorrectly. |
|
|
| ||
| < > is not on. | Set the < | > switch to . | 16 | ||
The film does | Film has not been loaded | Load the film correctly. | 24 | |||
not load. | ||||||
| properly. ( | blinks on the |
|
| 25 | |
| LCD panel.) |
|
|
|
| |
| The < > switch is not on. | Set the < | > switch to . | 16 | ||
A Custom |
|
|
|
|
| |
Function | The < > switch has been | Set the < | > switch to . | 19 | ||
cannot be set. | ||||||
| set to . |
|
|
|
| |
| < > switch is not on. | Set the < | > switch to . | 16 | ||
AF does not | The lens focus mode has | Set the lens focus mode to AF (or | 23 | |||
work. | been set to MF (or M). | A). |
|
| ||
| Custom Function | Set Custom Function | 104 | |||
| been set to 1 or 3. |
|
|
|