Focusing Point Selection
●Using the <
> dial to select a left or right focusing point
Automatic Selection
•When the dial is turned, the selected focusing point shifts in the following loop: Automatic selection ↔ Left ↔ Center ↔ Right ↔ Automatic selection.
•This loop applies to all focusing point rows.
●Using the < 
> dial to select an upper or lower focusing point.
•When the dial is turned, the selected focusing
point shifts in the following loop: Automatic selection ↔ Up ↔ Center ↔ Down ↔
Automatic selection.
• As shown in the figures, the focusing point selection shifts from single ( 
) to double
( 
) to single ( 
) focusing point(s).
• This loop applies to all focusing point columns.
• When double focusing points ( 
) are selected, focusing point selection will be automatic.
• When double focusing points have been selected and a left or right focusing point is selected, only one focusing point at a time will be selected.
39
