Slide the grip downward to remove.

2. Installing the Battery and Checking the Battery Level

The battery is housed in the camera grip. Remove the grip to install one 2CR5 lithium battery.

2

1

Battery release lever

Installing the Battery

1 Loosen the grip screw by turning it counterclockwise as shown in the figure.

2

3 Insert the battery so that its contacts touch the grip’s contacts at the bottom.

4 After inserting the battery, turn the battery as shown by the arrow in the figure.

To take out the battery, slide the battery release lever.

5 Reattach the grip to the camera, then turn the grip screw to tighten securely.

Lithium batteries may not be available in certain areas. Carry a spare battery when going on a trip or when you will use many rolls of film.

21

Page 21
Image 21
Canon EOS-3 manual Installing the Battery and Checking the Battery Level