
4. Eye-Control One-Shot AF Mode
1 Set the <
> switch to <
>.
2 Turn the <
> dial to select a CAL No.
• The CAL No. lights if calibration has been completed for that channel. If calibration has not been completed, the CAL No. blinks.
3 Set the < > switch to <
>.
4 Select the shooting mode.
5 While looking at the point to be focused within the area AF ellipse, press the shutter button halfway.
• The selected focusing point lights and achieves focus.
6 Take the picture.
You check the current CAL No. as follows:
1 Set the < > switch to <
>. 2 Press the <
> button.
• and the CAL No. will be displayed.
If the focusing point cannot be > icon in the viewfinder will blink and the camera will switch to automatic focusing point selection. See page 38.
47