
Major Specifications
■ Film Transport |
|
|
|
|
|
Film loading: | Automatic loading with a sprocketless system. After film is | ||||
| loaded and the back is closed, the film advances to frame 1 | ||||
| automatically, taking about 1 sec. |
|
| ||
Film advance system: | Automatic film advance with |
|
| ||
| (1) | EOS 3: Single | and continuous | shooting. |
|
| (2) | With Power Drive Booster | , low | ||
|
| continuous | , and high continuous | . |
|
Shooting capacity: | No. of |
|
| ||
| At 20°C: Approx. 75 /Approx. 50 At | ||||
| /Approx. 12 |
|
|
| |
| While using an EF 50mm f/1.4 USM lens, 1/1000 sec. shutter | ||||
| speed, | ||||
| following operations for each frame were executed: The lens | ||||
| was focused from infinity to the minimum distance and back, | ||||
| the shutter button was pressed halfway for 6 seconds, the | ||||
| picture was taken, and the settings were retained for 2 | ||||
| seconds. This operation cycle was repeated in continuous | ||||
| shooting mode and | ||||
| end of each roll. |
|
|
| |
Film rewind system: | At the end of the roll, automatic film rewind with a | ||||
| motor. Midroll rewind possible. |
|
| ||
Film rewind time: | Approx. 4.5 sec. for | ||||
| film |
|
|
|
|
Rewind noise: | 59 dB |
| |||
|
|
|
|
|
|
■ Camera |
|
|
|
|
|
Specifications |
|
|
|
|
|
Flash contacts: | (1) Hot shoe: |
|
| ||
| (2) Below camera back latch: JIS | ||||
| * | Flash units connected to (1) and (2) can be used and | |||
|
| fired simultaneously. |
|
| |
External Flash Unit |
| ||||
Compatibility: |
|
|
|
|
|
Custom Functions: | Eighteen | ||||
| screen characteristics, (1) Auto film rewind mode, (2) Film | ||||
| leader position after rewind, (3) Film speed setting method, (4) | ||||
| AF activation method, (5) Manual Tv/Av setting method, (6) | ||||
| Increments for shutter speed, aperture, exposure | ||||
| compensation, flash exposure compensation, and AEB, (7) | ||||
| Manual focusing with electronic focusing ring, (8) Frame | ||||
|
|
|
|
|
|