2.9If battery acid contacts your skin or clothing, immediately wash the area with soap and water. If acid enters your eye, immediately flood the eye with cold running water for at least 10 minutes and get medical attention right away.
2.10If battery acid is accidentally swallowed, drink milk, the whites of eggs or water. DO NOT induce vomiting. Seek medical attention immediately.
3.BATTERY CHARGING – AC CONNECTIONS
RISK OF ELECTRIC SHOCK OR FIRE.
3.1This battery charger is for use on a nominal
3.2An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure:
•That the pins on the plug of the extension cord are the same size and shape as those of the plug on the charger.
•That the extension cord is properly wired and in good electrical condition.
•That the wire size is large enough for the AC ampere rating of the charger as specified below.
3.3Recommended minimum AWG size for extension cord:
•100 feet (30.5 meters) long or less – use an 18 gauge (0.82 mm2) extension cord.
•Over 100 feet (30.5 meters) long – use a 16 gauge (1.31 mm2) extension cord.
4.FEATURES 2
1. LED Display
2. AC Connector
3.
Cable
3 |
|
|
1 | ||
5.ASSEMBLY INSTRUCTIONS
Remove all cord wraps and uncoil the cables prior to using the battery charger.
6.CONTROL PANEL
LED Display |
|
A.C. POWER | (red) LED lit: Indicates that there is AC power supplied to the battery |
charger. |
|
CHARGING | (yellow) LED lit: Indicates the charger is charging the battery. |
CHARGING | (yellow) LED flashing: Indicates the charger is in abort mode. |
CHARGED | (green) LED lit: Indicates the battery is fully charged and the charger |
is in maintain mode. | |
CHARGED | (green) LED flashing: Indicates the battery is 80% charged and is |
“ready to use”. |
|
• 2 •