5.Pressing “ENTER” will move to the next step.
6. Press the / Key to input the | SET | 500 | ||
battery capacity of CCA: | ||||
|
|
| ||
SAE: | ||||
Press “ENTER” to begin the test. |
|
|
| |
7.Test the battery for
CAL
8.When the test is complete, The display shows the actual volts and the actual CCA. (Compared to the CCAselected in step 6). One of five results will be displayed:
PASS: (Green light)
The battery is good & capable of holding a charge.
xx.xx 
SAE 
PASS
PASS & RECHARGE: (Green & Yellow lights)
The battery is good but needs to be charged.
xx.xx
SAE
PASS 
CHAR
RECHARGE & RETEST: (Yellow & Red lights)
Battery is discharged. The battery condition cannot be accurately determined until it is fully charged. Recharge & retest the battery.
xx.xx 
SAE 
PASS 
TEST
FAIL: (Red light)
The battery will not hold a charge. It should be replaced immediately.
xx.xx 
SAE
FAIL
BAD CELL: (Red light)
The battery has at least one cell short circuit .It should be replaced immediately.
xx.xx 
SAE 
BAD
CELL
5