Schumacher 6000A owner manual Battery Percent and Charge Time

Page 14

BATTERY PERCENT AND CHARGE TIME

This charger adjusts the charging time in order to charge the battery com- pletely, efficiently and safely. The microprocessor automatically makes the necessary decisions. However, this section includes guidelines that can be used to estimate charging times.

The duration of the charging process depends on three factors:

1.Battery State – If a battery has only been slightly discharged, it can be charged in less than a few hours. The same battery could take up to 10 hours if very weak. The battery state can be estimated by using the built-in tester (see page 10). The lower the reading the longer charging will take.

2.Battery rating – A higher rated battery will take longer to charge than a lower rated battery under the same conditions. A battery is rated in ampere-hours (AH), reserve capacity (RC) and cold cranking amps (CCA). The lower the rating the quicker the battery will be charged.

3.Charge rate – The charge rate is measured in amps. This charger provides charge rates of 2A and 30A￿￿10A. The 60A rate is for engine start only. The 2A rate is for charging smaller batteries such as those used for motorcycles and garden tractors. Such batteries should not be charged using the

30A￿￿10A rate. The 30A￿￿10A rate is for charging larger batteries. The 6000A charges at the selected charge rate and eventually reduces the charge rate in a controlled manner. After the charging process has started, the digital display can be used to determine charging progress by selecting the BATTERY % mode.

There are some important facts to keep in mind when charging a battery.

•When the display indicates 77% charged, the battery has been charged enough to start most vehicles and has already been charged as much as by many other battery chargers.

•When the display indicates 85% charged, the battery has already been charged at least as much as by most other battery chargers.

•The battery % shown in tester mode is an estimate based on the battery voltage and the Battery Council International scale. The battery % shown in charger mode is an estimate of the relative charge in the battery compared to the charge it should have if the charging process is allowed to complete.

•The battery % shown in tester mode can be used to estimate the relative charge time. The lower the % shown, the longer the charge time. The lower the % shown, the longer the charge time for a given battery.

•The battery % shown in charger mode is an indication of the relative progress of the charging process. The higher the battery % displayed, the less charge time remains.

•The more a battery is discharged, the faster it absorbs charge from a charger. That means that the battery % increases faster at the beginning of the charging process than at the end. In other words, it takes longer for the battery to absorb the last few percent of charge than the first several percent.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Send Warranty Product Repairs to SpeedChargeTable of Contents Important Safety Instructions Help US Help YOUPersonal Safety Precautions Using AN Extension Cord Before Using Your Battery ChargerPreparing Your Battery to be Charged Plugging ITOperating Instructions Charging Battery in the VehicleConnecting to a positive-grounded Negative Grounded SystemCharging Battery Removed from the Vehicle Using Engine StartCharge Rate Switch 6000A Control Panel Display Mode SwitchBattery Type Switch Speedcharge ControlDigital Display Mode of OperationControl Panel Guide Using the BUILT-IN Battery Tester Alternator Testing Notes Using the BUILT-IN Alternator TesterUsing Your Engine Starter StartingsequenceUsing Your Battery Charger Engine Starting Notes30A Charge Rate When set to Charging TipsBattery Percent and Charge Time Problem Possible Cause Solution TroubleshootingMaintenance and Care Limited Warranty

6000A specifications

The Schumacher 6000A is a powerful and versatile battery charger designed for automotive enthusiasts and professionals alike. This unit offers a perfect blend of advanced technology and user-friendly design, making it a staple for maintaining and reviving 12-volt batteries.

One of the standout features of the Schumacher 6000A is its high output of 6000 amps, allowing it to quickly charge even the most depleted batteries. This unit is particularly beneficial for those who often work with larger vehicles, including trucks and SUVs, where traditional chargers may fall short. The robust construction ensures durability, essential for both home garages and professional workshops.

The Schumacher 6000A also incorporates smart charging technology. This includes an automatic shut-off feature that prevents overcharging, safeguarding your battery and extending its lifespan. Furthermore, it uses an intelligent microprocessor that adjusts the charging process based on the battery’s condition, optimizing power delivery for both standard and AGM batteries. This adaptability not only enhances performance but also ensures that various battery types are sufficiently catered to.

Another key characteristic of the Schumacher 6000A is its user-friendly interface. Equipped with an intuitive LED display, users can easily monitor the charging status and battery condition at a glance. The clear visual indicators provide real-time updates, allowing users to stay informed about the process without requiring technical expertise.

Safety is another critical aspect of the Schumacher 6000A. The charger features reverse polarity protection, preventing accidental damage caused by incorrectly connecting the clamps. Additionally, it comes with built-in short-circuit protection, ensuring that users can operate the unit with peace of mind.

Portability is also factored into the design. The charger is compact and lightweight, making it easy to transport and store. With its ergonomic handle, users can easily maneuver the unit when needed.

In summary, the Schumacher 6000A battery charger stands out for its impressive charging capabilities, advanced smart technology, user-friendly features, and robust safety mechanisms. Whether for personal use or professional applications, it is an ideal choice for anyone looking to keep their batteries in top-notch condition. This charger not only meets the demands of modern automotive technology but also ensures reliability and ease of use.
Top Page Image Contents