Using the built-in Battery tester

OVERVIEW

This battery charger has a built-in battery tester that displays either an accurate bat- tery voltage or an estimate of the battery’s relative charge based on the battery volt- age and the Battery Council International scale.

TESTING SEQUENCE

There are four basic steps required to use the PSC-12500A as a battery tester.

1.Connect the charger battery clamps to the battery. Be sure to follow all of the precautions listed under “OPERATING INSTRUCTIONS”.

TESTER WITHOUT TIME LIMIT

If either the DIGITAL Display or Bat- tery Type button is pressed within the first 15 minutes after the PSC-12500A is powered up, it will remain a tester (not a charger) indefinitely, unless a charge rate is selected.

TESTING AFTER CHARGING

After the PSC-12500A has been changed from tester to charger (by selecting a charge rate), it remains a charger. To change the PSC-12500A back to a tester, press the CHARGE START button until all charge rate LEDs are off.

2.Connect the charger power cord to a 120V AC wall outlet. Again, be sure to follow all of the precautions listed under

“OPERATING INSTRUCTIONS”.

3.If necessary, press the Battery Type button until the correct type is indicated.

4.Read the voltage on the digital display or press the digital display button to set the tester to Battery % and read the battery percent.

TESTER AND CHARGER

When first turned on, the PSC-12500A

operates only as a tester, not as a charger. To continue to use it as only a tester, avoid pressing the charge start button. Se- lecting a charge rate activates the battery charger and deactivates the tester. Press- ing the CHARGE start button when the engine start LED is lit (except during the 180 second cool down) will shut off the charger and activate the tester.

POWER-UP IDLE TIME LIMIT

If no button is pressed within 15 minutes

after the PSC-12500A is first powered up,

it will automatically switch from tester to charger, if a battery is connected. In that case, the charger will be set for the small battery charge rate and 12V regular battery type.

TESTER STATUS LEDs

When the PSC-12500A is operating as a battery tester, the status LEDs light under the following conditions:

•The CHARGED (green) LED will light if a charged battery is tested.

•The CHARGING (yellow) LED does not light in the battery test mode.

•TheconnectedLEDlightsifaproperly connected battery is detected.

•When the tester digital display is set to voltage, the CHARGED and CHARG- ING LEDs won't light (it could be testing a battery or an alternator).

INITIAL PERCENT CALCULATION When a battery % is calculated for the first time after connecting a battery, the digital display will show three dashes (“---”) for a period as long as several seconds while the tester analyzes the battery.

NOTES FOR TESTING BATTERY %

A recently charged battery could have a temporarily high voltage due to what is known as “surface charge”. The voltage of such a battery will gradually drop during the period immediately after the charging system is disengaged. Consequently, the tester could display inconsistent values

00-99-000742, 94080027 specifications

Schumacher 94080027,00-99-000742 is a highly regarded product designed for automotive and motorcycle battery maintenance. One of its standout features is its ability to provide reliable jump-starting capabilities. This product is engineered to deliver high peak currents, making it effective for a wide range of vehicles, from compact cars to larger trucks and motorcycles.

One of the core technologies employed in the Schumacher 94080027 is smart charging technology. This intelligent system automatically adjusts the charge rate according to the battery's condition, ensuring optimal charging performance and prolonging battery life. The ability to switch between maintenance and boost modes enhances its versatility, allowing users to cater to various battery needs efficiently. This feature is particularly beneficial for seasonal vehicle owners, ensuring their batteries remain charged during periods of inactivity.

In terms of safety, Schumacher incorporates several critical characteristics into this model. It includes reverse polarity protection, ensuring that users cannot inadvertently connect the positive and negative clamps incorrectly, which can cause damage. The unit is also equipped with overcharge protection, helping to prevent battery overheating and ensuring a safe, smooth charging process.

The design of Schumacher 94080027 emphasizes user-friendliness. It comes with color-coded clamps for easy identification, and the lightweight yet durable casing allows for easy portability, making it suitable for both home and on-the-go use. The compact design fits conveniently in most trunks or storage compartments, ensuring it is always within reach when needed.

Another significant advantage of this model is its energy efficiency. It utilizes advanced technology to minimize power consumption during charging cycles, thus reducing electricity costs and environmental impact. This model also offers a quick-charge feature, which allows for rapid recharging of both the unit and the vehicle’s battery, making it an efficient choice for those on tight schedules.

Schumacher 94080027,00-99-000742 combines robust performance, smart technology, and safety features that make it an outstanding choice for anyone seeking a dependable battery maintenance solution. Its blend of power, efficiency, and ease of use positions it as a must-have tool for vehicle owners who prioritize battery health and performance.