Preparing your battery to be charged

Using an extension cord

The use of an extension cord is not rec- ommended. If you must use an extension cord, please make sure that you follow these guidelines:

•Make sure that the pins on charger's power cord fit firmly into the extension cord, and that the extension cord fits firmly into the receptacle.

•Check that the extension cord is properly wired and in good electrical condition.

•Make sure that the wire size is large enough for its length and for the AC ampere rating, as specified in the chart below.

MINIMUM RECOMMENDED EXTENSION CORD

Length of Cord, in Feet	25	50	100	150

AWG* Size of Cord	18	16	12	10

*AWG=American Wire Gauge

It is important that you read and follow these guidelines while you are preparing to charge the battery.

•Make sure that you have a 6 or 12 volt lead-acid battery. Determine voltage of battery by referring to vehicle owner’s manual or the battery markings. Charge battery initially at charger’s lowest rate.

•Clean the battery terminals. Be careful to keep corrosion from getting in or around your eyes or on your hands.

•Wear safety glasses. See additional “Per- sonal Safety Precautions” on page 3.

•If required, for batteries with removable vent caps, add distilled water to each cell until the battery acid reaches the level recommended by the manufacturer. This will help purge excessive gases from the cells. Be careful not to overfill. If you have a sealed battery with non-removable vent caps, no action is necessary.

•Take time to read all of the battery manufacturer’s specific precautions, such as removing or not removing vent caps while charging, and recommended rates of charge.

•Be sure that the area around the bat- tery is well ventilated while it is being charged. Gas can be forcefully blown away by using a piece of cardboard or other nonmetallic material as a fan.

•If it is necessary to remove the battery from the vehicle to charge it, always remove the grounded terminal from the battery first. Turn off all vehicle acces- sories to avoid sparks from occurring.

•NOTE: A marine (boat) battery installed in a boat must be removed and charged on shore.

operating instructions

NOTE: A marine (boat) boat battery must be removed and charged on shore. To charge it on board requires equipment specially designed for marine use.

IMPORTANT: Follow all safety instructions and precautions when charging your battery. Wear complete eye protection and clothing protection. Charge your battery in a well- ventilated area.

Charging Battery In The Vehicle:

1.Avoid personal injury by keeping clear of fan blades, belts, pulleys and other engine parts.

2.Avoid damaging the charger by keeping the power cord and output cords away from the hood, door or moving engine parts.

3.Note the polarity of the battery posts by checking the identification marks on the battery: POSITIVE (POS, P or +) and NEGATIVE (NEG, N or -). The positive post is usually larger than the negative post.

4.Identify which battery post is grounded or connected to the chassis. THIS IS NORMALLY THE NEGATIVE POST.

00-99-000742, 94080027 specifications

Schumacher 94080027,00-99-000742 is a highly regarded product designed for automotive and motorcycle battery maintenance. One of its standout features is its ability to provide reliable jump-starting capabilities. This product is engineered to deliver high peak currents, making it effective for a wide range of vehicles, from compact cars to larger trucks and motorcycles.

One of the core technologies employed in the Schumacher 94080027 is smart charging technology. This intelligent system automatically adjusts the charge rate according to the battery's condition, ensuring optimal charging performance and prolonging battery life. The ability to switch between maintenance and boost modes enhances its versatility, allowing users to cater to various battery needs efficiently. This feature is particularly beneficial for seasonal vehicle owners, ensuring their batteries remain charged during periods of inactivity.

In terms of safety, Schumacher incorporates several critical characteristics into this model. It includes reverse polarity protection, ensuring that users cannot inadvertently connect the positive and negative clamps incorrectly, which can cause damage. The unit is also equipped with overcharge protection, helping to prevent battery overheating and ensuring a safe, smooth charging process.

The design of Schumacher 94080027 emphasizes user-friendliness. It comes with color-coded clamps for easy identification, and the lightweight yet durable casing allows for easy portability, making it suitable for both home and on-the-go use. The compact design fits conveniently in most trunks or storage compartments, ensuring it is always within reach when needed.

Another significant advantage of this model is its energy efficiency. It utilizes advanced technology to minimize power consumption during charging cycles, thus reducing electricity costs and environmental impact. This model also offers a quick-charge feature, which allows for rapid recharging of both the unit and the vehicle’s battery, making it an efficient choice for those on tight schedules.

Schumacher 94080027,00-99-000742 combines robust performance, smart technology, and safety features that make it an outstanding choice for anyone seeking a dependable battery maintenance solution. Its blend of power, efficiency, and ease of use positions it as a must-have tool for vehicle owners who prioritize battery health and performance.