3M Important Safety Instructions, 3M Scotch-WeldPolyurethane Reactive PUR Easy 250 Adhesive

Page 3

Important Safety Instructions

SAVE THESE INSTRUCTIONS

Read all instructions before using this product.

3MScotch-WeldPolyurethane

Reactive (PUR) Easy 250 Adhesive

IMPORTANT: For additional health and safety information, see product label and Material Safety Data Sheet for Scotch-Weld™ Adhesive used.

!WARNING

Use only with 3M™ Scotch-Weld™ Polyurethane

Reactive (PUR) Easy 250 Adhesive Cartridges. Use with any other materials may cause hazardous conditions.

!WARNING

3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Adhesive Cartridges should be preheated or used in 3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Preheater or 3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Adhesive Applicator only. Do not preheat 3M Scotch-Weld Polyurethane Reactive (PUR) Easy 250 Adhesive

Cartridges in ovens or other heating devices or use in other applicators. May cause hazardous conditions.

!WARNING

Do not heat or expose 3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Adhesive to temperatures or surfaces above 275°F (135°C).

Vapors of heated material may be irritating to eyes and respiratory tract and may cause asthma-like symptoms in persons previously sensitized to isocyanates.

!WARNING

Do not clean or remove 3M™ Scotch-Weld™

Polyurethane Reactive (PUR)Adhesive with heat, flame, or solvent. May cause hazardous vapor

or fire.

!WARNING

Avoid Contact with flammable materials

3MScotch-WeldPolyurethane Reactive (PUR) Easy 250 Adhesive Preheater Operation

!WARNING

To reduce the risk of electrical shock or injury while operating or servicing the 3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Adhesive Preheater, observe the following safety rules:

1.Operate and service the applicator only as described in this manual.

2.Connect the applicator only to a properly grounded outlet.

3.Do not unplug the applicator by pulling on the cord. Grasp the plug, not the cord, to unplug.

4.Do not handle the plug or applicator with wet hands.

5.Do not use the applicator outdoors or on wet surfaces.

6.Do not use the applicator with damaged cord or plug.

7.Do not use the applicator if it is not working properly or has been dropped, damaged, submerged in water, or left outdoors.

!WARNING

Use only 3-prong grounded plug and properly

grounded outlet. Failure to use properly grounded plug and outlet may cause electrical shock.

IMPORTANT: If you are not sure of proper connections, get help from a qualified electrician or service person.

!WARNING

Do not use an unapproved extension cord with the applicator. Use an extension cord which complies with NEC requirements and state and local codes and other requirements.

IMPORTANT: Use of an improper extension cord may cause electrical shock.

!Caution

Avoid contact with top surface and metal heating

chambers of preheater during use and hot adhesive cartridges and adhesive. May cause burns.

IMPORTANT: Wear heat resistant gloves and safety glasses when using.

©3M 2007 January

3MScotch-WeldPolyurethane Reactive (PUR) Easy 250 Adhesive Preheater User’s Manual

1

Image 3
Contents Scotch-Weld Table of Contents 3M Scotch-WeldPolyurethane Reactive PUR Easy 250 Adhesive Important Safety Instructions220/240 Volt Model Grounding InstructionsInstructions for Use Important Wear heat Instructions for Use Troubleshooting During Warranty Period Industrial Business Industrial Adhesives and Tapes Division