HEAD SECTION
DISASSEMBLYASSEMBLY
Remove valve plug (30600) and valve components can be re- moved from head. To remove lever throttle, remove roll pin (Y178-28). To remove button throttle, remove roll pin (Y178-212).
Assemble “O”ring (Y325-7) to valve stem. Assemble valve stem into head. Assemble spring (30609) and regulator (30603) into head, aligning hole in regulator with air inlet of head. Assemble seal (30602) to head and secure valve components with “O”ring (Y325-13) and valve plug (30600).
LEVER 30610
THROTTLE BUTTON30346
ADAPTER 328
VALVE PLUG 30600
I | 30547 LEVER HEAD ASSEMBLY |
|
JI INCLUDED IN 47052 LOCK-OFF LEVER ASSEMBLY
47052 LOCK-OFF LEVER ASSEMBLY
32654 ADAPTER
* 46548 ROLL PIN
23902-210 CONNECTOR, l/4”
HOUSING 30653-l(NOT INCLUDED IN 30547-l
LEVER HEAD ASSEMBLY)
OPTIONAL 30547-l LEVER HEAD ASSEMBLY - LOCK-OFF TYPE
INCLUDES PARTS SHOWN IN THIS GROUP (EXCEPT CONNECTOR), PLUS: VALVE STEM (46135), “O” RING (Y325-7), SPRING (30609), AIR REGULATOR (30603), SEAL (30602), “O” RING (Y325-13) AND VALVE PLUG (30600).
